Laserfiche WebLink
WGES / WGEC Series <br /> Outdoor Evacuation Signals <br /> Architect & Engineering Specifications <br /> The audible and/or visible signal shall be Gentex WGES,WGEC Outdoor Evacuation Signal Series or approved equal and shall be listed by <br /> Underwriters Laboratories Inc.per ANSI/UL 1638 and/or ANSI/UL 464 and CAN/ULC S526 and/or CAN/ULCS525. The notification appliance <br /> (WGEC)shall produce a peak sound output of 100dBA or greater at as measured in an anechoic chamber and shall also have the capability <br /> to silence the audible signal while leaving the visible signal energized with the use of a single pair of power wires.Additionally,the user shall <br /> be able to select either continuous or temporal tone output with the temporal signal having the ability to be synchronized. The audible/ <br /> visible and visible signaling appliance shall also maintain a minimum flash rate of 1 Hz or up to 2 Hz regardless of power input voltage. The <br /> appliance shall have an operating current of 170mA or less for the 75Cd strobe circuit. The appliance shall also be capable of meeting the <br /> candela requirements of the ADA(75cd). The appliance shall be polarized to allow for electrical supervision of the system wiring.The unit <br /> shall be provided with a mounting bracket with terminals with barriers for input/output wiring and be able to mount to a single gang or <br /> double gang box or double workbox without the use of an adapter plate.The unit shall have an input voltage range of 16-33 volts with either <br /> direct current of full wave rectified power for 24 volt models. The appliance shall be capable of testing supervision without disconnecting <br /> wires.Also the appliance shall be capable of mounting to a surface back box. The unit shall also be able to verify voltage at the unit without <br /> removing unit. The appliance has extended temperature range of-31°to 150°F(-35°to 66°C). The appliance shall satisfy virtually all outdoor <br /> and severe environment applications. The GOE Enclosure is includes a gasket that must be inserted between the box and mounting bracket. <br /> There are drain holes in the back box to allow for drainage,the seal on the GOE Enclosure is not water tight. The GOELP Enclosure includes a <br /> weather seal for mounting to wall and intended for use with universal electrical box. To allow for drainage,bottom edge of enclosure is not <br /> water tight. <br /> CORPORATIONGENTE X Fire Protection Products Group 1 10985 Chicago Drive I Zeeland,MI 49464 551-0047-04 <br /> :00 <br />