Laserfiche WebLink
APPENDIX B <br />LABORATORY TESTING <br />Soil samples obtained from the borings were transported to our laboratory and examined to confirm or <br />modify field classifications, as well as to evaluate index properties of the soil samples. Representative <br />samples were selected for laboratory testing consisting of moisture content and sieve analyses. The tests <br />were performed in general accordance with test methods of ASTM International (ASTM) or other applicable <br />procedures. <br />Moisture Content <br />Moisture contenttests of selected samples were completed in general accordance with ASTM D 2216. The <br />results of these tests are presented on the exploration logs in Appendix A at the depths at which the <br />samples were obtained. <br />Sieve Analyses <br />Sieve analyses were performed on selected samples in general accordance with ASTM D 422. The wet <br />sieve analysis method was used to determine the percentage of soil greater than the U.S. No. 200 mesh <br />sieve. The results of the sieve analyses were plotted, were classified in general accordance with the Unified <br />Soil Classification System (USCS) and are presented in Figure B-1, Sieve Analysis Results. <br />GEOENGINEER� December6, 2021 Page B-1 <br />File No. 24 59-003-00 <br />