Laserfiche WebLink
Page 3 of 6 <br /> ® MICROFAST® QUICK <br /> RESPONSE PENDENT <br /> SPRINKLER VK302 (K5.6) <br /> The Viking Corporation,210 N Industrial Park Drive, Hastings MI 49058 <br /> Telephone:269-945-9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email:techsvcs@vikingcorp.com <br /> Visit the Viking website for the latest edition of this technical data page: www.vikinggroupinc.com <br /> TABLE 1:AVAILABLE SPRINKLER TEMPERATURE RATINGS AND FINISHES <br /> Ordinary 135 °F (57 °C) 100 °F (38 °C) Orange <br /> Ordinary 155*F(68°C) 100"F(38°C) Red <br /> Intermediate 175°F (79°C) 150°F (65 °C) Yellow <br /> Intermediate 200°F (93 °C) 150°F (65 °C) Green <br /> High 286°F(141 °C) 225`F (107 °C) Blue <br /> Sprinkler Finishes. Brass, Chrome,White Polyester, Black Polyester, and ENT <br /> Corrosion-Resistant Coatings': White Polyester, and Black Polyester. ENT in all temperature ratings except 135 °F (57 °C) <br /> Footnotes <br /> 'The sprinkler temperature rating is stamped on the deflector. <br /> z Based on NFPA-13.Other limits may apply,depending on fire loading,sprinkler location,and other requirements of the Authority Having Jurisdiction. <br /> Refer to specific installation standards. <br /> 'The corrosion-resistant coatings have passed the standard corrosion test required by the approving agencies indicated in the Approval Charts.These <br /> tests cannot and do not represent all possible corrosive environments. Prior to installation, verify through the end-user that the coatings are com- <br /> patible with or suitable for the proposed environment. For automatic sprinklers,the coatings indicated are applied to the exposed exterior surfaces <br /> only.Note that the spring is exposed on sprinklers with Polyester and ENT coatings. For ENT coated automatic sprinklers,the waterway is coated. <br /> Sprinkler wrench 13655WB** <br /> for recessed pendent <br /> sprinklers <br /> "*A 1/2" ratchet is required <br /> (not available from Viking) <br /> -_ Carefully slide the wrench sideways around <br /> the protective cap, ensuring engagement with <br /> the sprinkler wrench flats <br /> Figure 2: Wrench 13655W/B for Recessed Pendent Sprinklers <br /> Form No. F_033314 19.02.21 Rev 19.1 <br />