3201 SMITH AVE BASE FILE 2025-09-24

SYSTEM SENSOR° 111, I1�1 Indoor Selectable- 1 Output Speaker E 'Wig Strobes and Dual r�l�l�l�lll�l,lll�i �1�1 . Voltage Evacuation I111111111111,1,1,1 1111 111111111 1 Speakers for Wall ,111 1 I 1,11 Applications System Sensor L-Series selectable output speaker strobes ` and dual-voltage evacuation speakers can reduce ground faults and enable faster installation with lower current draw and modern aesthetics. The System Sensor L-Series of speakers and speaker strobes reduce costly ground faults using a plug-in design and universal Features mounting plate that allow the installer to pre-wire mounting plates, • Plug-in design and protective cover reduce ground faults dress the wires,and confirm wiring continuity before plugging in the speakers. In addition,a protective plastic cover prevents nicked • Universal mounting plate with an onboard shorting spring tests wires by covering exposed speaker components. wiring continuity before installation • No extension ring required These devices also enable faster installations by providing instant • Field selectable candela settings on wall units: feedback to ensure that wiring is properly connected,rotary switches 15,30,75,95, 110, 135, 185 to select voltage and power settings,and 7 field-selectable candela settings for wall speaker strobes. • Automatic selection of 12-or 24-volt operation at 15 and 30 candela The low total harmonic distortion of the speaker offers high fidelity • Rotary switch simplifies field selection of speaker voltage sound output while still offering high volume sound output for use (25 and 70.7 Vrms)and power settings(1/4,1/2, 1 and 2 watts) in high ambient noise applications. • Speakers offer high fidelity and high volume sound output System Sensor L-Series makes installation easy • 520 Hz+/-10%square wave tone capable with compatible FACP .Attach a universal mounting plate to a 4 x 4 x 21/8 inch back box. • Compatible with System Sensor synchronization protocol Flush-mount applications do not require an extension ring. • Electrical compatibility with existing SpectrAlert and SpectrAlert .Connect the notification appliance circuit or speaker wiring to the Advance products terminals on the mounting plate. •Attach the speaker or speaker strobe to the mounting plate by • Tamper-resistant construction inserting the product tabs into the mounting plate grooves. Hinge • Updated modern aesthetics the device into position to lock the product pins into the mounting plate terminals.The device will temporarily hold in place with a Agency Listings catch until it is secured with a captured mounting screw. SIGNALING & F M X LISTED APPROVED 54048 FM approved except 7320-1653:0505 for ALERT models 3057493 AVDS867-02.03/23/2018•Page 1