10710 EVERGREEN WAY 2025-09-11 - Laserfiche WebLink

&NAUTOCALL 4007ES Hybrid, Fire Detection and Control Unit with Addressable and/or Conventional Initiation Power supply output and zone/relay module details Power supply output details RUI Communications controls up to 10 remote devices at up to 2500 ft(762 m)for single run,or 10,000 ft(3048 m)total if wiring is Class B and T- tapped;selectable as Class B or Class A Compatible RUI remote equipment includes:A4606-9202 and A4606-9205 Color Touchscreen Annunciators(up to 6 total),4100 Series 24 1/0 and LED/Switch modules,A602 Series LED/Switch and 1/0 Annunciator modules,including A602-9101 Status Command Units(SCU),and A602-9102 Remote Command Units(RCU) IDNet 2 SLC output provides electrically isolated Class B or Class A communication;standard capacity is up to 100 addressable points with expansion for up to 250 points using up to two A007-9803 IDNet 2 Loop Expansion Modules;as described in IDNet 2 addressable channel capacity 6 A output rating,including current for:special application notification appliances;IDNet devices;module currents;and auxiliary output current (battery charging,CPU,and power supply current does not subtract from the 6 A);when NACs are controlling Regulated 24 DC Appliances,total NAC current available is 3 A Four on-board Class B/Class A NACs,rated 3 A each for Special Application appliances;selectable for SmartSync horn and strobe control,or strobe synchronization;rated 2 A each for Regulated 24 DC appliances NAC EOL resistor values are selectable as: 10 kohms,3.9 kohms,4.7 kohms,5.1 kohms,5.6 kohms,or 15 kohms Battery charger is dual rate,temperature compensated,and charges up to 18 Ah sealed lead-acid batteries mounted in the battery compartment, and charges up to 33 Ah batteries mounted in an external cabinet Battery and Charger Monitoring includes battery charger status and low or depleted battery conditions;status information provided to the master controller includes analog values for:battery voltage,charger voltage and current,actual system voltage and current,and NAC current Low Battery Voltage Cutout is selectable when required(required for ULC Listing applications) 2 A Auxiliary Output(AUX/SNAC)can be selected either as resettable auxiliary power of 2 A @ 24 VDC,or selected to be a simple NAC(SNAC)for sounder base power,four-wire detector power,or door holder power Zone/relay module details Select as IDC or Relay;configure up to eight Class B IDCs,or up to four Class A IDCs;or up to eight Relay outputs rated 2 A resistive @ 30 VDC(N.O.or N.C.);or combinations of IDCs and Relays;each zone is separately configurable as an IDC or Relay output IDC Support.Each IDC supports up to 30,two-wire devices IDC EOL resistor values are selectable as:3.3 kohms,2 kohms,2.2 kohms,3.4 kohms,3.9 kohms,4.7 kohms,5.1 kohms,5.6 kohms,6.34/6.8 kohms, and 3.6 kohms+1.1 kohms;see instructions for more details Page 5 AC4007-0001 Rev.20 11/2021