Laserfiche WebLink
If the LP-Gas facility is provided with LOW EMISSION TRANSFER <br /> EQUIPMENT, then continue the analysis below. Otherwise skip <br /> section 5.3.2 and go to Chapter 6. <br /> Form 5.7 <br /> Evaluation of Low Emission Transfer Equipment <br /> A B C D E F <br /> I Installed in NFPA 58 <br /> t the facili ? <br /> Section <br /> e Description Features <br /> In No NA Reference <br /> # (2014 Edition) <br /> Transfer into Delivery nozzle and Fixed maximum liquid <br /> permanently filler valve-Max. level gauge not used 6.30.5.3 <br /> 1 mounted ASME liquid release after during transfer ❑ ❑ (A)and(B) <br /> containers on transfer of 4 cm <br /> vehicles (0.24 in 3) operations <br /> During product Does not exceed 4 cm <br /> Transfer into (0.24 in)from a hose <br /> stationary ASME transfer or post of nominal size 1 inch El E] 0 6.30.5.4(A) <br /> transfer uncoupling <br /> containers or smaller <br /> 2 delivery valve and of the hose,liquid Does not exceed 15 <br /> product volume nozzle released to the c1113(0.91 in')from a ❑ ❑ ✓❑ 6.30.5.4(B) <br /> combination atmosphere hose of nominal size <br /> larger than 1 inch <br /> Transfer into Do containers of less than 2,001 gal(w.c.)have <br /> stationary ASME an overfilling prevention device or another ❑ ❑ ✓❑ 6.30.5.4(F) <br /> 3 containers approved device? <br /> maximum filling Do containers 2,001 gal(w.c.)or greater have a ❑ ❑ 0 6.30.5.4(E) <br /> limit float gauge or other non-venting device? <br /> Transfer into <br /> stationary ASME Not used during routine transfer operations but 6.305.4 <br /> 4 containers used to calibrate other non-venting liquid level ❑ ❑ (C)and(D) <br /> fixed maximum gauges in the container <br /> liquid level gauge <br /> Note: 1) If the facility does not have a particular feature described in items 2 or 3,check"NA"corresponding to its row. <br /> If separation distance reductions are intended, check <br /> marks made in the "No" column of either Form 5.6 or <br /> Form 5.7 must be addressed and brought into <br /> compliance with the specific edition of NFPA 58 that <br /> the facility was constructed to. <br /> A - 10 <br />