3003 W CASINO RD BLDG 40-58 2025-11-03

December 6, 2012 Sprinker 133c SPRINKLER WRENCHES AND CABINETS -N41KJW*j The Viking Corporation, 210 N Industrial Park Drive, Hastings MI 49058 Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email: techsvcs@vikingcorp.com IMPORTANT NOTES The sprinkler cabinet should be easily accessible. The sprinkler cabinet must not be exposed to corrosive atmospheres or temperatures above 100 °F (38 °C). The stock of spare sprinklers should include an adequate number of sprinklers of each type and temperature rating. The stock of sprinklers must be in good condition. A sprinkler wrench of the appropriate type must be included in the cabinet. Orient sprinklers and sprinkler wrench as indicated in Figure 1 below. CAUTION: When replacing automatic sprinklers in an existing system, be sure to replace with sprinklers of the correct type, thread size, orifice size, temperature rating, and finish. IMPORTANT: Always refer to Bulletin Form No. F_091699 - Care and Handling of Sprinklers. Also refer to the appropriate sprinkler data page.Viking sprinklers and spray nozzles are designed to be installed in accordance with the latest edition of Viking technical data, the latest standards of NFPA, FM Global, LPCB, APSAD, VdS or other similar organizations, and also with the provisions of governmental codes, ordinances, and standards whenever applicable. The use of certain types of sprinklers may be limited due to occupancy and hazard. Refer to the Authority Having Jurisdiction prior to installation. CAUTION: WHEN REPLACING AUTOMATIC SPRINKLERS IN AN EXISTING SYSTEM,BE SURE TO REPLACE WITH SPRINKLERS OF THE CORRECT TYPE.THREAD SIZE.ORIFICE SIZE. 1 TEMPERATURE RATING AND FINISH. VIKING =-'- I r Figure 1: Correct orientation of sprinklers and wrench inside cabinet. Figure 2: Sprinkler Cabinet 01724A Figure 3: Sprinkler Cabinet 01725A (12-head cabinet shown) (Sprinklers and wrench not included) (Sprinklers and wrench not included)