Laserfiche WebLink
Fail Safe Operation Requirements <br /> In the event of a power failure, including battery back-up, the gate(s) shall automatically open, by spring <br /> tension or other non-electrical method, or the gate must be capable of being pushed open without <br /> additional steps having to be performed. <br /> Manually (Non-Automatic) Operated Gates <br /> All manually operated gates shall be designed to remain in the open position when left unattended. <br /> Manual locking mechanisms, such as padlocks, shall be Knox brand only. <br /> Manual gates are subject to the same opening width and plan approval process as automatic gates. <br /> Manual gates shall be provided with an approved method for emergency access.Approved methods shall <br /> consist of one of the following: <br /> • High security padlock(Knox Brand) Keyed to EFD <br /> emergency access keyway, or <br /> • Installation of a Knox rapid access key box <br /> containing the gate key. <br /> o If a key box is used, it shall be installed on <br /> a gate support pillar or post adjacent to <br /> the gate.The box must be visible to <br /> anyone approaching the gate at all <br /> times. <br /> Note: Chain gates or cable gates are not approved <br /> methods to gate a fire access roadway. <br /> Y <br /> MOW- <br /> Gates Serving Residential Dwellings. <br /> Entry gates located across private driveways serving less than three residences shall comply with the <br /> following: <br /> • When one or more of the dwellings or residential lots is farther than 150 feet from the public <br /> roadway.The gate shall be at the width of not less than the required driveway width approved <br /> for the project. <br /> Serving Three or More Dwellings <br /> Gates located across private driveways serving three or more dwellings are required to comply with all <br /> provisions found in this document including gate width and gate operations. <br /> Fire Marshal's Office 425.257.8120 1 everettwa.gov/fire INFORMATION HANDOUT A-3 14.22.2021 1 Page 2 <br />