Laserfiche WebLink
Page 5 of 5 <br /> MIRAGE° QUICK RESPONSE <br /> ELO CONCEALED PENDENT I I U:N:G* SPRINKLER VK469 (K11.2) <br /> The Viking Corporation, 210 N Industrial Park Drive, Hastings MI 49058 <br /> Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email: techsvcs@vikingcorp.com <br /> Visit the Viking website for the latest edition of this technical data page www.vikinggroupinc.com <br /> Sprinkler and Adapter _ 2-3/4" (70 mm)to <br /> Assembly 2-7/8" (73 mm) <br /> • Protective cap r Sprinkler Wrench diameter opening <br /> removed Part No. 15467W/B** required in the ceiling. <br /> • Use wrench �- <br /> 15466** _ <br /> Step 1: Step 2: 1 1 <br /> Carefully slide the wrench Carefully press the wrench upward and <br /> sideways around the turn slightly to ensure engagement with the <br /> deflector and pins sprinkler wrench flats. <br /> IMPORTANT: <br /> • NEVER install the sprinkler by applying the installation wrench across the frame arms. <br /> • DO NOT overtighten. <br /> • DO NOT apply more than 25 ft-lbs of torque. <br /> • Use only the designated sprinkler wrenches, Part Numbers 15467W/B**or 15466**. <br /> • A leak tight seal should be achieved by turning the sprinkler clockwise 1 to 1-1/2 turns beyond finger tight. <br /> Figure 2: Sprinkler Installation and Proper Wrench Usage <br /> **A 1/2" ratchet is required (Not available from us.) <br /> 3/4" (20 m) NPT <br /> �r <br /> 2-3/4" 359 2-1/2" — <br /> (70 mm) (76 mm) (64 mm) <br /> 0 � <br /> Maximum Minimum <br /> NOTE: Upon sprinkler activation, the deflector descends to <br /> approximately 1-3116"(30 mm)below the sprinkler body. <br /> Figure 3: Sprinkler Intstallation Dimensions <br /> Form No. F_120508 Rev 02 September 2023 Replaces Form No. F_120508 Rev 01 <br /> (Updated 135F cover plate temp.to 139F.) <br />