Laserfiche WebLink
victaulic.com <br /> 3.0 SPECIFICATIONS — MATERIAL <br /> Housing: Ductile iron conforming to ASTM A-536, grade 65-45-12. Ductile iron conforming to ASTM A-395, <br /> grade 65-45-15, is available upon special request. <br /> Housing Coating: (specify choice) <br /> ❑ Orange coating. <br /> ❑ Red coating (standard for EMEA-1 and Asia Pacific). <br /> ❑ Optional: Hot dipped galvanized. <br /> Coupling Gasket(specify choice): <br /> ❑ Grade "E" EPDM Type A Vic-Plus" Gasket System' <br /> EPDM (Violet color code). FireLock products have been Listed by Underwriters Laboratories Inc. and Approved by <br /> Factory Mutual Research for wet and dry (oil free air) sprinkler services up to the rated working pressure using the <br /> Grade "E" Type A Vic-Plus' Gasket System, requiring no field lubrication for most installation conditions. <br /> ❑ Grade "L" silicone <br /> Recommended for dry heat, air without hydrocarbons to+350°F and certain chemical service. <br /> For dry services, Victaulic continues to recommend the use of Grade "E" Type A FlushSeal°Gasket. Contact <br /> Victaulic for details. <br /> Standard gasket and FlushSeal gasket approved for dry pipe systems to—40oF/-40°C.Based on"typical"pipe surface conditions,supplemental lubricant is <br /> recommended for services installed below 0°F/-18°C and for all dry pipe systems or systems to be subjected to air tests prior to being filled with water. <br /> Supplemental lubrication may also be required on pipe with raised or undercut weld seams or pipe that has voids and/or cracks at the weld seams.Victaulic <br /> continues to recommend the use of FlushSeal gaskets for dry services. <br /> NOTE <br /> • Additional gasket styles are available.Contact Victaulic for details. <br /> Bolts/Nuts: Carbon steel oval neck track bolt(s) meeting the mechanical property requirements of ASTM A449 (imperial) <br /> and ISO 898-1 Class 9.8 (M10-M16) Class 8.8 (M20 and greater). Carbon steel hex nuts meeting the mechanical <br /> property requirements of ASTM A563 Grade B (imperial) and ASTM A563M Class 9 (metric). Track bolts and hex <br /> nuts are zinc electroplated per ASTM B633 Fe/Zn 5, finish Type III (imperial) or Type II (metric). <br /> 10.02 01538 Rev P Updated 11/2021 ©2022 Victaulic Company.All rights reserved. <br /> victaulic.com 2 ✓ctauliic° <br />