Laserfiche WebLink
FCOR. SEISMIC BRACES "W! <br /> Fig. AF086 (Formerly Afcon Fig. 086) Adjustable Structural Brace Attachment <br /> Size Range:Flange Thickness: Up to'/i'thick(UL), <br /> Up to 3/8"thick(FM) C UL US FM <br /> LISTED APPROVED <br /> Material:Carbon Steel <br /> Finish:❑Plain or❑Electro-Galvanized per ASTM B633 <br /> Service:A seismic structural attachment designed to attach <br /> to steel I-beams.The structural brace attachment rigidly braces <br /> piping systems subjected to horizontal seismic loads. <br /> Approvals:cULus Listed(UL 203a)and FM Approved(FM 1950-10 y' <br /> &FM 1950-13).Complies with the hanging and bracing requirements <br /> listed in NFPA 13.Additionally,cULus Listed(UL 203)as a hanger for <br /> up to 8"pipe. <br /> Features:Shear off nuts provide a visual indication that the desired <br /> torque value has been achieved. <br /> Installation Instructions: <br /> • Insert one'/2"x P/2"hex bolt through the mounting hole of one bracket. <br /> • Place both brackets on a horizontal steel flange. <br /> • Install two'/2"-13 studs or bolts with the shear off nuts through the mounting slots on both brackets.Studs or bolts <br /> manufactured per ASTM A307 or equivalent. <br /> • Torque shear off nuts evenly and equally until the heads shear off. <br /> • Install the'/2"x 1'/2"mounting bolt through the'/2"AF075,AF076,or AF077 mounting hole.The mounting bolt shall be <br /> installed wrench tight(typically finger tight plus'/a to'/2 turns). <br /> • Installation angle determined by the brace angle of the brace pipe and the AF075,AF076,or AF077. <br /> • Fire Protection applications shall also be installed per the requirements of NFPA 13 and local codes. <br /> Patent:No.6,334,285 <br /> 1/2"-13 Stud or Bolt x2(Not Included) <br /> Ordering:Specify figure number,finish and description. <br /> Note:Only sold with brackets and shear off nuts.'/2"x 1'/2" <br /> hex bolt and'/i'-13 studs or bolts not included. W <br /> Notes:Anvil International®brand bracing components are designed to be <br /> compatible ONLY with other Anvil International®brand bracing components, Fig.AF086 <br /> resulting in a Listed seismic bracing assembly.Updated UL listing information Bracket x2 <br /> may be viewed at www.ul.com and updated FM approval information may be <br /> viewed at Fig.AF086 <br /> www.approva[guide.com. Shear Off Nut x2 H <br /> Disclaimer:Anvil International("Anvil')does not provide any warranties and <br /> specifically disclaims any liability whatsoever with respect to Anvil bracing <br /> products and components that are used in combination with products,parts or 1/2"-13x11/2 Hex Bolt(Not Included) <br /> systems not manufactured or sold by Anvil.In no event shall Anvil be liable for 1/2"-13 Hex Nut(Not Included) <br /> any incidental,direct,consequential,special or indirect damages or lost profits <br /> where non-Anvil bracing components have been,or are used. FIG.AF086: DIMENSIONS (IN) •WEIGHT(LBS) <br /> SeisBrace°Seismic Fire Protection Design Tool may be accessed at <br /> www.seisbrace.com Mounting Bolt Mounting Slots H W Weight <br /> '/2 1/2 21/4 3 2.25 <br /> PROJECT INFORMATION APPROVAL <br /> Project: ❑Approved <br /> Address: ❑Approved as noted <br /> Contractor: []Not approved <br /> Engineer: Remarks: <br /> Submittal Date: <br /> Notes 1: <br /> Notes 2: <br /> PH-1.18 <br />