Laserfiche WebLink
8.00 <br />MIN <br />endo- <br />U SM <br />Connect drain hose to the RSC unit using the included <br />drain hose and gasket (pictured below). Attach the hose <br />to the building drain system. The required pitch of the <br />drain is 1/8 unit vertical in 12 unit horizontal. If using a <br />electric drain pan or pump, the RSC unit must be a <br />minimum of 8.0 inches away from the wall. Connect <br />electric drain pan or to a separate I I5V power supply. <br />Pour about 1 gallon of water into the RSC drain to verify <br />there are no leaks, and the drain system / sump / pan work <br />properly. <br />**To order an electric sump or drain pan contact Sanden <br />Vendo** <br />- Condensate Pan, Evapoway (SVA Number 1241338) <br />- Condensate Pump (SVA Number 1231359) <br />CONDENSATE PUMP / PAN <br />Install the Leveling Legs by sliding the leg into the pre -installed Holding Bracket. Begin installation by hand, and <br />finish with a soft mallet. Insure unit is level by lowering and adjusting Leveling Leg Bolts. Insure the RSC does <br />not roll and push down Thread Cover. <br />16 <br />