Laserfiche WebLink
<br />Page 13 of 56 <br /> <br /># Feature Mandatory or <br />Desired <br />7 Two (2) 12-volt accessory outlets must be provided in the cab—one (1) on each of the driver and officer side seating <br />areas. The receptacles must be wired constant hot. M <br />8 <br />All wiring must be protected from impact, abrasion, water, ice, and heat sources. The wiring must be color-coded and <br />functionally labeled on the outer surface of the insulation for ease of identification and maintenance. The wiring harness <br />must conform to SAE 1127 with GXL temperature properties. Any exposed wiring connections must be weather-resistant. <br />All harnesses must be covered in a loom rated at 280°F to protect the wiring against heat and abrasion. <br />M <br />HVAC <br />Heating & Air Conditioning <br />9 The heating and air conditioning system must be rated for use in an emergency vehicle and must provide sufficient <br />defrosting, heating, and cooling to the entire cab and module. M <br />10 <br />A gravity condensation drain system must be utilized to remove all condensation from the evaporator units on a <br />slope of up to a 13% grade in any direction and direct it to the exterior of the chassis cab. Systems utilizing pumps to <br />remove condensation are not acceptable. <br />M <br />11 If a roof-mounted condenser is utilized, the visible cover, excluding the core fins, must be painted to match the cab <br />color. <br />M <br />Mirrors <br />Cab Mirrors <br />12 Provide OEM-powered, heated cab mirrors, operated by a switch within easy reach of the driver. M <br />