1110 CHESTNUT ST 2018-01-01 MF Import

( 32. On-site recreation facilities must be provided per Section 15.110 of the Zoning Code. Prior to lhe issuance of Building Permits, the Planning Department must approve a plan for on-site recreation facilities. As part of the building permit application, the applicant must submit a recreation plan including standards and specifications for recreation areas and equipment, both inside and outside the building, including pictures of proposed equipment. If sufficient information is not known at time of submittal for building permits, minimum specifications or examples must be provided. Prior to the issuance of Building permits, the Planning Department must approve a plan for on-sile recreation facilities. Tot lots must be located in central areas, where adequate supervision of children can be provided. 33. Building faCade modulation and rootline variation must be provided per Section 15.050 of the Zoning Code. The maximum permitted wall length without building fa�ade modulation is 30 feet. Fire Department Comments 1. Access - The International Fire Code requires that all new structures shall provide Fire Department access roads to within 150 feet of all portions of the ground floor. Fire Departmenl access roads (Fire Lanes) shall provide a minimum of 20 feet in width of unobstructed, paved driving surface with a minimum clear height of 13'6". Inside turn radii must be 35 feet. Slope approach and departure angles must not exceed 10 degrees. Fire lane c�rade must not exceed 15 percent. Fire lane construction must comply with AASHTO H30 load capacity. Fire Lanes will be posted and maintained as required by the Fire Department. The inside turn radius from the alley access does not comp�y. • Ensure the retaining wall can support AASHTO H24 loads to the edges of the driving surface. • The radius of tlie turnaround on Chestnut Street must be 40 feet per City of Everett Public works Design Standard drawing number 304, dated 3-23-1996. 2. Fire Lane Markinq - Fire apparatus access roads shall be marked whenever necessary to maintain the unobstructed minimum required width of roadways. Fire lanes shall be marked as follows: a. Curbs shall be identified by red traffic paint with a 6-inch wide stripe on the top and front, extending the length of the designated fire lane. b. Rolled curbs shall be identi(ied by red traHic paint with a 6-inch wide stripe on the curb, extending the length of lhe designated fire lane. c. Lanes without curbs shall be identified by red traffic paint with a 6-inch wide stripe on the pavement, extending the length of the designated fire lane. �