Laserfiche WebLink
Evergreen Way Hair Cutting, continued <br />Window datz, continued <br />Total area of glass windowa and glass doors <br />Floor area of main building <br />Ratio of glass to floor area <br />Per cent of insulated glass <br />Per cent of glass not insulated <br />Ratio of insulated qlass to floor area <br />Ratio of non-insulated glass to floor area <br />357.39 sq ft <br />2,187,00 sq ft <br />16.35 <br />16.30 � <br />80.50 � <br />13.00 � <br />3.78 � <br />Out building, Hyench doors 13'-6" x 6'-B�� = 90 aq ft insulated <br />entry door 2'-6" x 6'-8�� 77,77 sq ft insulated <br />Total area of glass and glass doors <br />Floor area of o��t building <br />Ratio of glass to floor area <br />107.77 sq ft <br />763.00 sq ft <br />14.12 � <br />Out building walls will be insulated with blown-in or foamed-in-place <br />insulation. Roof/ceiling will be insulated to R-30. R-38 is not required, <br />even in new construction where the finished ceiling is coincident with the <br />underside of sloped roof rafters. (Cathedral ceiling exception.) <br />Attic Ventilation <br />Per the UBC, Section 3205(c): The net free area of ventilation may be 1/300 <br />of the area to be vented if at least 50� of the required vent area is located <br />in the upper portion of the vent space. and at least 3 feet above the eaves. <br />Attic ventilation is to be increased in the west-facing gable end of Cutting <br />Room 1 and in the south-facing gable end of Cutting Room 2, as follows: <br />Area of Cutting Rooms 1& 2= 21'x 51' = 1,071 sq ft <br />1071 sq ft x 1/300 = 3.57 net eq ft of vent area <br />3.57 net sq ft / 2 vents (one vent in each gable) = 1.75 net sq ft per vent <br />Use AWSCO #7100 curve top 2'-8�� x 7'-6�� high = 1.75 net sq ft in each gable. <br />Attic ventilation is to be increased in the west-facing gable if the Reception <br />Room and in the east-facing gable end over the back door from the Laundry Room, <br />as follows: <br />Reception = 14' x 29' + Shampoo/Bath = 12' x 21' + Office/Laundry = 10� x 19� _ <br />a total of 848 sq ft <br />848 sq ft x 1/300 = 2.g2 net aq ft of vent area <br />2•8z / Z gable ends = 1.4 sq ft per gable end <br />Use AtJSCO #1100 curve top, 2'-6�� x 1'-6�'h = 1.75 sq ft of net area in the <br />gable end above the back door from the Laundry Room, and in the gable end <br />above the Reception Room facing west. <br />