|
2009 Washington Slate Ener v Code Compliance Form for Nenres'denlia: ar M,Qtifamily Residential
<br />MOM • OR• •
<br />2009 Washington state Energy Code Compliance Forms Ica Nonresidential and Mulbtamily Residentol Revised Nor:member 2010
<br />Prescriptive Spaces Occupancy: O Warehouse or Parking Garage Q Other
<br />Qualification Checklist Lighting Fixtures: ❑ Check if 95% or more of futures comply with 1.2 or 3 and rest are ballasted.
<br />Note: If occupancy type is "Other" and fixture 1. Fluorescent fixtures with a) 1 or 2 two lamps, b) reflector or louvers
<br />answer is checked, the number of futures In (Section c) 5-60 watt T-1, T-2, T-1, T-5, T-8, or CFL lamps, and d) Imrd-wired electronic
<br />the space is not limited by Code. Cleary 1521)
<br />Indicate these spaces on plans. It not dimming ballasts. Screw -in CFL fixtures and tracking lighting do not qualify.
<br />qualified, do LPA Calculations. 2. Metal Halide with a) reflector b) ceramic MH lamps 4=150w e) electronic ballasts
<br />3. LED lights.
<br />All nce LPA
<br />TABLE 15-1 Unit Lighting Power owe
<br />LPA Ift
<br />Use
<br />LPA /k
<br />Use
<br />Automotive facility
<br />0.85
<br />Office buildings, officeladministraWo areas in facilities
<br />0.91
<br />of other use types (including but not limited to schools,
<br />hospitals, institutions, museums, banks, churches)'
<br />Convention center
<br />1.10
<br />1.10
<br />Parkin are as
<br />Penitentiary and other Grou 1-3 Occupancies
<br />0.20
<br />0.90
<br />Courthouse
<br />Cafeterias, fas"cod establishments ,-
<br />1.20
<br />Police and fire stations
<br />0.90
<br />restauranls(ta,s'
<br />0.85
<br />Post once
<br />1 00
<br />Dormitory
<br />1.00
<br />Retail retail banking, mail concourses, wholesale
<br />1.33
<br />Dweling Units
<br />,
<br />stores allet rack shelving)
<br />0.95
<br />School buildings (Group E Occupancy only), school
<br />1.00
<br />Fxer_ise center
<br />classrooms day care centers
<br />Gymnasia, assemblyspaces
<br />0.95
<br />Theater, motion picture
<br />1.25
<br />Health rare clinic
<br />1.00
<br />Theater, erforrnin arts
<br />.
<br />0.80
<br />Hospital, nursing homes, and other Group 1-1 and
<br />1.20
<br />Transportation
<br />1-2 Occupancies
<br />0.50
<br />Hotelfmotel
<br />1.00
<br />Warehouses
<br />1.20
<br />Laboratory spaces (all spaces not classthed
<br />1.62
<br />Workshops
<br />'laboratory* shall meet office and other appropriate
<br />categories)
<br />Laundries
<br />1.20
<br />1.20
<br />Plans Submitted for Common Areas Only
<br />Libraries
<br />Manufacturing facility
<br />1.20
<br />Main floor building lobbies (except mall concourses
<br />1.10
<br />1.00
<br />Common areas, corridors, toilet facilities and
<br />0.80
<br />Museum
<br />washrooms, elevator lobbies
<br />Footnotes for Table 15-1
<br />1) In cases in which a general use and a specific use are listed, the specific use shall apply. In cases in which a use is not mentioned
<br />specifically, the Unit Power Allowance shall be determined by the building official. This determination shall be based upon the most
<br />comparable use specified in the table. See Section 1512 for exempt areas.
<br />2) The watts per square foot may be increased, by 2% per foot of ceiling height above 20 feet, unless specifically directed otherwise by
<br />subsequent footnotes.
<br />3) Watts per square foot of room may be Increased by 2% per foot of ceiling height above 12 feel.
<br />4) For all other spaces, suds as seating and common areas, use the Unit Light Power Allowance for assembly.
<br />5) Watts per square foot of room may be increased by 2% per foot of ceiling height above 9 feet.
<br />6) Reserved.
<br />7) For conference rooms and offices less than 150fe with full height partitions, a Unit Lighting Power Allowance of 1.1 wife may be used.
<br />8) Reserved.
<br />9) For indoor sport tournament courts with adjacent spectator seating over 5,0JO, the Unit Lighting Power Allowance for the court area is
<br />2.60 Wife.
<br />10) Display window, illumination installed within 2 feet of the window, provided that the display window is separated from the retail space by
<br />walls or at least three -quarter -height partitions (transparent or opaque) and lighting for free-standing display where the lighting moves
<br />with the display are exempt.
<br />An additional lighting power allowance is allowed for merchandise display luminaires installed in retail sales areas that are specifically
<br />designed and directed to highlight merchandise. The following additional wattages apply:
<br />1. 0.6 watts per square foot of sales floor area not listed in items it and iii below,
<br />ii. 1.4 watts per square foot of furniture, clothing, cosmetics or artwork floor area; or
<br />Ill. 2.5 watts per square foot of jewelry, crystal or china floor area.
<br />The specified floor area for items I, it, or iii above, and the adjoining circulation paths shall be Identified and specified on building plans.
<br />Calculate the additional power allowance by multiplying the above LPDs by the sales floor area for each department excluding major
<br />circulation paths. The total additional lighting power allowance is the sum of allowances for sales categories I, it, or iii plus an additional
<br />1,000 watts for each separate tenant larger than 250 square feet in area.
<br />The additional wattage is allowed only if the merchandise display luminaires comply with all of the following:
<br />(a) Located on ceiling -mounted track or directly on or recessed into the ceiling itself (not on the wall).
<br />(b) Adjustable In both the horizontal and vertical axes (ver!ical axis only is acceptable for fluorescent and other fixtures with two
<br />points of track attachment).
<br />This additional lighting power is allowed only if the lighting is actually installed and automatically controlled, separately from the general
<br />lighting, to by turned off during nonbusiness hours. This additional power shall be used only for th- specified luminaires and shall not be
<br />used for any other purpose.
<br />This additional lighting power is allowed only if the lighting is actually installed.
<br />11) Provided thrt a floor plan, indicating rack location and height, is submitted, the square footage for a warehouse may be defined, for
<br />computing the Interior Unit Lighting Power Allowance, as the floor area not covered by racks plus the vertical face area (access side only)
<br />..r u......o.. Ts,. w..:..wr .u............:..a....d i. r,...r...a., o .,....r.......,...� .4,. e............, .......,-..a �.. .....�..
<br />
|