1410 GRAND AVE 2018-01-02 MF Import

WATTSUN 5 .5=====---------=====COMPONSNT CHfiCKLIST =______________=====12/03/97s FILfi: F:\\WATTSi7N5\\�NSWFILS HOUSS ID: ________________________________________________________________________________ (R30 blown Attic STD baffled 1269.0 ft2 ineulation is installed to the manufacturer' s recommended density and coverage. Attic access doors are insulated and weatherstripped. Heating system: DSFAULT Heating System Size: The heating system does not exceed: 39361 BTUs . Ductwork _ All ductwork joints are sealed with mastic, pexmanent tape, or other material approved by building official . _ Ductwork joints are mechanically faetened. Sach cylindrical duct joint is fastened with a minimum of three connectors. Plumbing _ Non-recirculating water pipes outside heated space are insulated to at least R-3 . _ Hydronic space heating pipes are insulated to at leaet R-4 . Sxhaust fane, spot ventilation _ Bathroom fane are Home Ventilating institute-rated 50 CFM (minimum) . Kitchen fans are HVI-rated 100 CFM (minimum) . _ Fan ducting has minimal benda and tenninates outaide of the building. Whole House Fan Size: The whole house ventilation fan system provides at leaet : [ ] 60 CFM measured capacity, OR [ ) 90 CFM measured capacity, OR ( ] 85 CFM inatalled capacity [ � The whole house ventilation fan is remotely located outside of the thexmal envelope, OR [ ] if surface-mounted, the whole house ventilation fan has a 1.5 sone rating. The fan ie mounted to rduce noise. The automatic control is set to provide ventilation for a minimum of 8 hours each day. Ports, registers, or a central fresh a�r intake supplying outeide air in the quantity of 10 CFM are located in each bedroom and the ma_n living area. fixhaust Duct Ineulation: _ All exhaust ducts extendir.�g more than two feet beyond insulation are insulated to R4. ------------------------------------- Page 3 =___-------------________�____�____ ------------------------------------- -------------