3320 PINE ST 2016-01-01 MF Import

., ' � � � �� The water closet flush controls should be shown mounud on the wide side of t6e water closet area. Secdon 1106.11.5.4 Lavatory drain pipes and hot water pipes should be shown raxssed, insulated or guerded to prevent contact. Secdon 1106.11.7.4 Energy ��' The roof insulation should be a minimum of R-21 for the prescripdve path. A component analysis should be submitted in order to use R-19 as shown. Section 1322 8c 1330 � The slab-on-grade insulation should be specified as a minimum of R-10. Section 1311.5 /3! The opaque doors (man and overhead) should be spe.;ified to have maximum U- factors of 0.60. Table 13-1 �� The storofront glazing system should be specified to have a maximum U-facwr of 0.90. Table 13-1 f.� Per Footnote 2 to Table 15-1, ?he warehouse lighting power allowance of 0.50 may be allowed an increase of 16% (based on the approxunate average height of the ceiling above 20 feet). The LPA uf 0.64 as used in the calculations should be clarified. Section 1521 Prepare a response letter showing where each item in this correction lemr is addressed on tl�e plan set. Upon resubmital of the drawings, your application will be given priority and plan rcview will commence. All required submittals shall be of sufficient detail and contain sufficient infotmation to ensure that the proposed structure will be consttucted ia compliance with all Fdopted codes. Sincerely, � �/� v—�� Tony Associate Engineer n:��:ne��n