2811 FULTON ST 2016-01-01 MF Import

� � � � PUBLIC WORKS PERMIT COMMENTS 4. As per Public Works approved plan dated 5. Connect side sewer per City Standard #601. � Connect side sewer per City Standa�d #'s 601, 60�, 604. �Connect all rooftop downspouts to the side sewer. 8. Connect rooftop downspouts to the drainage sys*em provided for this lot. 9. Rooftop runoff must be discharged to a roof downspout in!iltration system per City of Ev�rett Storm Manual 3-2.6.2. Width _, Depth _, Length_. 10. The contractor must meet with the Public Works Inspector to discus� potential drainage routing prior to beginning the project. 11 Instali erosion control measures as determined by the Public Works inspector, such as silt fence, straw bales, swales, or erosion blankets. 12. Install erosion control measures per City of Everett Standards for small parcels 13 Remove erosion control measures upon completion of the project prior to final approval of the permit. 14 All excavated material from foundation, sidewalk and driveways shall be hauled to an approved, permitted site. No wasting of material is allowed on this b�ilding lot. 15. Remove and replace curb, gutter and sidewalk as per City of Everett Standard Plan #'s 305A & 306 on this proposal's frontage as directed by the Pubiic Works Inspector (i.e. all unused driveways and any broken or damaged area must be repiaced). 1�. Install a Type I concrete driveway per City of Everett Standard #307. 17 Pave driveway from the�property line out to the street paving. 18. Contact the Water District tor connecting provisions for this building's water and sewer services. 19. A catch basin as per City Standard Plan TM402 with a gas trap per Standard Plan n410 is required for the parking area. 20. If a sewer pump system is to be installed, the pressure line must discharge into a private manhole, then gravity flow across the public right-of-way. 21. A sprinkler system is required for this building in compliance with the requirements of NFDA Standards 13D. Z/L' PIVCcmrents