11232 3RD AVE SE 2016-01-01 MF Import

PUBLIC WORKS PERMIT COMMENTS 4. As per Public Works appruved plan dated 5. Connect side sewer per City Standard #6C';. 6. Connect side sewer per City Standard #'s 601, 602, 604. 7. Connect oil rooftop downspouts to the side sewer. 8. Connect rouftcp dow;ispouts to the dreinage system provided for this lot. 9. Rooftop runoff must be discharged to a ruo(downspout infiltration system per City of Everett Storm Manual 3-2.6.2. The approximate size trench is 3.5' wide, 2' deep and 25' long. See attachment for more details. 10. The contractor must meet with the Public Works Inspector to discuss potenlial drainage routing prior to beginning the project. 11. Install erosion conlrol measures as deterrc�ined by the Public Works inspector, such as silt fence, straw bales, swales, or erosion blankets. 12. Install erosion control measures per City o(Everett Standards for smali parcels 13. Remove erosion control measures upon completion of the project prior to final approval of the permit. 14. All excavaled material from foundation, sidev,�aik and driveways shall be hauled to an approved, permitted site. No wasting of material is allowed on this building lot. 15. Remove and replace curb, gutter and sidewalk as per City of Everett Standard Pian #'s 305A & 306 on this proposal's irontage as directed by the Piiblic Works Inspector (i.e. all unused driveways and any broken or damaged area must be r2placed). 16. Install a Type I concrete driveway per City of Everett `:;�,',dard #307. 17,' Pave driveway from the front properly line oul to the sfreet �eving. 18. Contact the Water Uistrict for connecting provisions tor lhis building's water and sewer services. 19. A catch basin as per City Standard Plan �402 with a gas trap per Standard Plan #410 is required for the parking area. 20. If a sewer pump system is tc be installed, the {�ressure line must discharge into a private manhole, then gravity flow acros; the public riqht-of-way. 21. A sprinkler �slem is requirad fcr this building in compliance��ith the requirements of NFDA Standards 13D. FWComments �