7532 TYEE RD 2016-01-01 MF Import

� PUBLIC WORKS PERMIT COMMENTS 4. As per Public Works approved plan dated ((�onnect side sewer per City Standard #601. �� 6. Connect side sewer per City Standard #'s 601, 602, 604. 7. Connect all rooftop downspouts to the side sewer. (8 Connect rooftop downspuuts to the drainage system provided for this lot. `9. Rooftop runoff must be discharged to a roof downspout infiltration system per City of Everett Storm Manual 3-2.E2. Width_, Depth_, Lennth_ 10. The contractor must meet with the Public Works Inspector to discuss potential drainage routing prior to beginning the project. 11 Install erosion control measures as determined by the Public Works inspector, such as silt fence, straw bales, swales, or erosion blankets. 12. Install erosion control measures per City of Everett Standards for smali parcels 13 Remove erosion control measures upon completion of the project prior to final approval of the permit. � AII exca:��ted material from foundation, sidewalk and driveways shall be hauled to an �� approved, permitted site. No wasting of material is allowed on this building lot. 15. Remove and replace curb, gutter and sidewalk as per City of Everett Standard Plan#'s 305A & 306 on this proposal's frontage as directed by the Public Worics Inspector(i.e. all unused driveways and any broken or damaged area must be replaced). ' 16. Install a Type I concrete driveway per Cih�of Everett Standard #307. �7. Pave driveway from the front propeity line out to the street paving. 18. Contact the Water District for connecting provisions for this building's water and sewer services. 19. A catch basin as per City Standard Plan #402 with a gas trap per Stan,iard Plan iW10 is required for the parking area. 20. If a sewer pump system is to be installed, the pressure line must discharge into a private manhole, then gravity flow across the public right-of-way. 21. A sprinkler system is required for this building in compliance with the requirements of NFDA Standards 13D. � P'JlComments ( 7..� � \ l�