4101 RUCKER AVE CHEVRON 2018-01-02 MF Import

INFORMATION FOR DEVELOPER: The following information is provided for the developer's benefit. These are not SEPA conditions. All requirements are preliminary in nature, and are based upon the preliminary site plan and the ordinances in effect at time of submittal for SEPA review. The proposal must comply with all ordinances In effect at the time a complete building permit application is filed, Including those not specifically set forth herein. (Exception: For vesting under the Zoning Code, please refer to Section 44 of the Zoning Code). Contact the Planning Department for information regarding appeals processes for the requirements listed in this document. 1. A discharge authorization from IPT may be required. The applicant shall contact the city's Industrial Pretreatment pr3gram as soon as possible about this project. 2. There are existing storm drainage and sanitary sewage pipes running under the proposed location of the new car wash. The pipes may need to be upgraded to meet the UPC where under the new structure. 3. A building permit is required. 4. A fire hydrant is required within 200 driving feet, but not closer than 50 feet, of every structure. Location of the hydrant(s) shall be approved by the Fire Marshal. 5. FireFlow -Fire flow requirements for this structure are 1,500 gpm. 6. Fire Alarm Svatem - An approved automatic fire detection system shall be provided as required by City Ordinance No. 1902-92, Chapter 16.76, of the Everett Municipal Code. Plans for such system shall be submitted to the Fire Marshal for review and approval prior to installation. Submittal shall include cut sheets of all equipment intended for use. Appropriate trip tests, witnessed by a Fire Department inspector, shall be performed, along with a certificate of completion, prior to final acceptance of the system. Arc alarm systems shall he installed according to NFPA Standard 72. Fire alarm systa.0 shall be installed under permit of the City of Everett Building Department. Electrical inspcctions and approval are required prior to calling for acceptance tests. Call (425) 257- 8810 for permit information.