3716 RUCKER AVE A,B,C,D 2016-01-01 MF Import

PUBLIC WORKS PERMIT COMMENTS 4. As per Public Works approved plan dated 5. Connect side sewer per City Standard #60',. 6. Connect side sewer per City Standard #'s 601, 602, 604. 7. Connect all rooftop downspouts to the side sewer. 8. Connect rooftop downspouts to the drainage system provided for this lot. 9. Rooftop runoff must be discharged to a roof downspout infiltration system per City of Everett Storm Manual 3-2.6.2. The approximate size trench is 3.5' wide, 2' deep and 25' long. See altachment for more details. 10. The contractor must meet with the Public Works Inspector to discuss potential drainage rouling prior to beginning the project. 11. Install erosion control measures as determined by the Public Works inspector, such as silt fence, straw bales, swales, or erosion blankets. 12. Install erosion control measures per City of Everett Standards for small parcels 13. Remove erosion control measures upon completion of the project prior to final approval oi the perniit. � 14. All excavated materiai from foundation, sidewalk and driveways shall be hauled to an approved, permitted site. No wasting of material is allowed on lhis building lot. 15. Remove and repiace curb, gutter and sidewalk as per City of Everett Standard Plan #'s 305A & 306 on this proposal's frontage as directed by the Public Works Inspector (i.e. all unused driveways and any broken or damaged area must be replaced). 16. Install a Type I ccncrete driveway per City of Everett Standard #307. 17. Pave driveway from the front property line out to the street paving. 18. Contact the Waler District for connecting provisions for this building's water and sewer services. ;19. A catch basin as per "iry Standard Pian #402 with a gas trap per Standard Plan #410 is required for the parking area. 20. I( a sewer pump system is to be installed, the pressure line must discharge into a private manhole, then gravity flow across the public right-of-way. 21. A sprinkler system is required for this building in compliance with the requirements of NFDA Standards 13D. PPiComments � n / -� � �� ti �.