2229 WETMORE AVE 2018-01-02 MF Import

11. Supports for solar modules are Installed to spread the dead load across 3s many roof - framing members as needed to ensure that no point load exceeds fifty (50) pounds, ❑ (IRC M2302.2.1(5)) 12. The photovoltalc modules and supporting structure shall be constructed of noncombustible materials or fire -retardant treated wood equivalent to that required for ❑ the roof construction. (IRC M2302.2.1) _ 13, Roof and wall penetrations shall be flashed and sealed to prevent entry of water, ❑ rodents, and Insects. (IRCM2302.2.2) 14. PV modules are listed and labeled with a Pre classification In accordance with UL 1703. ❑ (IRCM2302.23) ' Comments: i ... If you answered yes to all of the above questlons, the project qualifies for the over-the- counter permitting process. Determine if your project qualifies for an Over -the -Counter electrical permit Yes No N/A El i. PV modules, Inverters, and combiner bones are Identified for use In PV systems. El 2. The Inverters are listed and labeled In accordance with UL 1741 and are listed for utility Interaction. (IRC 102302.41 3. The AC Interconnection point Is on the load side of service disconnect. (NEC 690.64(B)) P3 ❑ .❑ 4. The system meets all current NEC, City and Washington Cities Electrical Code requirements. _ S. For Split -Buss modules the AC interconnection must be one of the six service disconnects. 6. Maximum load added to the paneiboard is based on the rating of the panelboards bus/maln OCPD combination In accordance with NEC 705.12(0)(2)(3)(b), and Is limited to (check combination that applies): 0225 amp bus/200 amp maln OCPD - 13,440 AC watts, maximum 70 amp Inverter OCPD. 13225 amp bus/225 amp main OCPD - 8,640 AC watts, maximum 45 amp Inverter OCPD. ❑200 amp bus/200 amp main OCPD - 7,860 AC watts, maximum 40 amp Inverter OCPD. t0P150 amp bus/150 amp main OCPD - 5,760 AC watts, maximum 30 amp Inverter OCPD. ❑ 125 amp bus/1Z5 amp m,ln OCPD - 4,800 AC watts, maximum 25 amp Inverter OCPD. 012Sampbus/100ampmalnOCPD- 9,600 AC watts, maximum 50 amp Inverter OCPD.