1118 80TH ST SW BASE FILE 2018-01-02 MF Import

" I April 27, 1971 CITY OF Pepsi Cola Bottling Co. everett 3231 Broadway _.+. -.L{ . xf. ..., Everett, Washington 98201 L.L.L•*. ..-,\=TOY v.xe Re: New Building, 1118 80th Place, Everett, Washington Gentlemen: The following requirements of the Uniform Building Code must be met before a building permit is to be issued for the balance of the construction. 1. Justify the total cost of the building. 2. Provide solid core door with self closer to workshop area. o'ection 503 and Table 5 B. 3. Change s•ring of door to liquid and sugar concentrate area to t: swing in line of egress, or change to double acting doors with 200 square inches of view panel in each door. Sec. 3303 (b). 4. Protect columns in area separation wall with 2-hour protection. 505 (c) . Three layers of 5/8" X rated gypsut3 required. (Table 43 A, item 25) 5. Area separation wall shall be two-hours (two layers of 5/8" X rated gypsum board each side) with 111 hour openings. Sec. 505 (c) 6. Door openings require B-label doors, frames and hardware, self- closing with fusible links. Sec. 4306 (b) and (e) (100 Sq. In. of wire glass each door) Windows not allowed in 2-hour wall. 7. Toilet rooms shall have hard, smooth, non-absorbent floors and 4'0" high wainscot. Sec. 1711 (a) 8. Submit Technical information regarding plastics, and conform to Chapter 52. 9. Provide exhaust system for garage area. Sec. 1105 10. Provide wet stand pipes. Section 3804 11. Provide fire curtains in space between floor and suspended ceilQings 1000 sq. feet maximum. Sec. 2517 (e) 12. Change detail of second floor framing into 2-hour wall for 2-hour protection. 13. Provide 2-hout wall to roof at wall between vending service and bottling area. 14. Storage room live loads shall comply with Table 23 A. 15. Drawings do not agree with specifications regarding Sec. 2314. 16. Provide lateral support for masonry walls in accord with 2419 (b) 2, 2417 (c) and Table 24 I.