Laserfiche WebLink
FHA <br /> PPOTTER*A�o"Ml FIXED TEMPERATURE <br /> The Symbol of Protection HEAT SENSOR <br /> Operation <br /> The FRA is an analog/addressable sensor that uses one address on the Signaling Line Circuit(SLC)of a compatible fire alarm control panel.The <br /> unit communicates with the control panel as it is polled.The LEDs flash every time the unit is polled and they will latch steady if the unit is in <br /> an active status. <br /> The FHA is a single sensor that may be used in a wide variety of'applications for property protection.The FILA has a high ambient installation <br /> temperature and has been tested in these environments.The unit has a sleek design and low profile for pleasing aesthetics.The temperature <br /> sensor is protected within the mold of the unit to prevent accidental damage <br /> Compatible Bases <br /> All bases will mount on a single gang,double gang,octagon,4"square or mud ring electrical box. <br /> Device Description <br /> AB-4 4"Standard Base <br /> AB-6 6"Standard Base <br /> AIB 6"base with an isolator module included.The base is pre-wired with a pluggable jumper to the module. <br /> ARB 6"base with a dual relay module included.One relay is rated for 8 amps at 240 VAC/30 VDC and the second is <br /> rated for 2 amps at 240 VAC/30 VDC.The base is pre-wired with a pluggable jumper to the module. <br /> ASB 6"base with sounder module included.Sound pattern is provided from external source.The base is pre-wired <br /> with a pluggable jumper into the module. <br /> PRINTED IN USA MKT.#8830017-REV C PAGE 2 OF 2 <br /> 06/13 <br />