5324 COLLEGE AVE 2017-09-08 - Laserfiche WebLink

1 [4. pports for solar modules are installed to spread the dead load across as many roof- aming members as needed to ensure that no point load exceeds fifty(50)pounds, E� ❑ C M2302,2.1(5)1 e photovoltaic modules and supporting structure shall be constructed of ncombustible materials or fire-retardant treated wood equivalent to that required for L� El e roof construction. [iRC M2302.2,1] of and wall penetrations shall be flashed and sealed to prevent entry of water, dents,and insects,[IRC M2302,2.2] modules are listed and labeled with a fire classlflcation In accordance with UL 1703, C M2302,2.31 nts: If you answered yes to all of the above questions,the project qualifies for the over-the- counter permitting process. Determine if your project qualifies for an Over-the-Counter electrical permit Yes No N/A 1. PV modules, inverters,and combiner boxes are identified for use In PV systems. Cl 2. The Inverters are listed and labeled In accordance with UL 1741 and are listed for utility Interactipn• [IRC M2.302.4) IX 0 3, The AC interconnection point is on the load side of service disconnect. [NEC 690.64(8)1�T 4. The system meets all current NEC,City and Washington Cities Electrical Code El requirements• 5. For Split-Buss modules the AC Interconnection must be one of the six service ❑ disconnects. 6. Maximum load added to the panelboard is based on the rating of the panelboards bus/main OCPD combination In accordance with NEC 705.12(1))(2)(3)(b),and Is limited to(check combination that applies): ❑225 amp bus/200 amp main OCPD-13,440 AC watts,maximum 70 amp Inverter OCPD. ❑225 amp bus/225 amp main OCPD- 8,640 AC watts,maxlmum 45 amp Inverter OCPD. 0200 amp bus/200 amp main OCPD- 7,860 AC watts,maximum 40 amp Inverter OCPD, ❑150 amp bus/150 amp main OCPD- 5,760 AC watts,maximum 30 amp inverter OCPD. 11125 amp bus/125 amp main OCPD- 4,800 AC watts,maximum 25 anip inverter OCPD. 171125 amp bus/100 amp main OCPD- 9,600 AC watts,maximum 50 amp Inverter OCPD.