819 N BROADWAY WASHINGTON STATE UNIVERSITY 2018-05-11

Stormwater Pollution Prevention Plan • Section 2—SITE DESCRIPTION. This section provides a detailed description of the existing site conditions, proposed construction activities, and calculated stormwater flow rates for existing and post-construction conditions. • Section 3 —CONSTRUCTION BMPs. This section provides a detailed description of the BMPs to be implemented based on the 12 required elements of the SWPPP (SWMMWW 2005). • Section 4—CONSTRUCTION PHASING AND BMP IMPLEMENTATION. This section provides a description of the timing of the BMP implementation in relation to the project schedule. • Section 5 —POLLUTION PREVENTION TEAM. This section identifies the appropriate contact names (emergency and non-emergency), monitoring personnel, and the onsite temporary erosion and sedimentation control inspector. • Section 6—INSPECTION AND MONITORING. This section provides a description of the inspection and monitoring requirements such as the parameters of concern to be monitored, sample locations, sample frequencies, and sampling methods for all stormwater discharge locations from the site. • Section 7—RECORDKEEPING. This section describes the requirements for documentation of the BMP implementation, site inspections, monitoring results, and changes to the implementation of certain BMPs due to site factors experienced during construction. Supporting documentation and standard forms are provided in the following Appendices: 111 Appendix A — Site Plans Appendix B —Construction BMPs Appendix C —Alternative Construction BMP list Appendix D —General Permit Appendix E —Site Log and Inspection Forms Appendix F —Engineering Calculations I I 2 1