3003 W CASINO RD BLDG 40-37 2018-09-21

Product Overview — (continued) Sensitivity Settings Model 87201 DPU operates on AC power or rechargeable Application Parameter Sets batteries,providing flexibility and convenience in programming Model OP921 provides four(4)pre-programmed sensitivity and testing equipment from practically any location. parameter sets that can be selected by the FACP to match the Model OP921 is a plug-in,two-wire and addressable photoelectric expected app{ication or environmental conditions: smokedetector. ModeIOP921 ist�7Underwriters'Laboratories • sensitive • Standard Listed[�UL268A Listed for direct in-air duct usageJ. • Robust Each detector consists of a dust-resistant photoelectric chamber • Air-duct and microprocessor-based electronics with a low-profile plastic Sensitive: This application parameter set is practically housing. EveryModel OP921 firedetectorisshippedwitha suitable for areas where few misleading sources of false protectivedustcover: alarm are present, and is appropriate where priority is ,, ;, given to detecting open fires as soon as possible(e.g.— typically a clean application with controlled �` 1 environmental conditions.) Standard: This application parameter set is practically apt for normal office, hotel-lobby-type applications, ,�, �� ,;, and is the default setting. �� :; z � Robust: This application parameter set offers improved resistance to false alarms in areas where : �� misleading sources, such as cigarette smoke or exhaust "��"� fumes, may cause a nuisance alarm. `�� "„ �w.��, �,; �. nustcover Air-Duct: This application parameter set is used when 2. Smokedetector the detector is used a 4UL268A (DI) compliant direct in- air duct application without a duct housing. Operation Model OP921 does not require a field sensitivity test. Model OP921 isawide-spectrum,photoelectricsmokedetector Model OP921 ist>UL Listed as a self-testing device and incorporating an infrared light-emitting diode(IRLED),and complies with NFPA 72 as a self monitoring detector infrared light sensing photodiode. Under normal conditions,light and control panel arrangement. This parameter set is transmittedbytheLEDisdirectedawayfromthephotodiodeand also used when Model OP921 is used in air-duct scattered through the smoke chamber in a controlled pattern. housings (Models FDBZ492 and FDBZ492-NR). The visible LED flashes green every 10 seconds to The smoke chamber is designed to manage light dissipation and i ndicate communication with the FACP, and to notify extraneous reflections from dust particles or other non-smoke, Model OP921 has passed its self-test. Should Model airborne contaminants in such a wayasto maintain stable, OP921 sense a fault or failure within its system, the LED consistentdetectoroperation. Whensmokeentersthedetector Will flash amber, and the detector will transmit the data chamber,light emitted from the IRLED is scattered by the smoke to the FACP. partides,and is received bythe photodiode: A quick visual inspection is sufficient to indicate the U condition of Model OP921 at any time. If more detailed �''. _ � r � „�. information is required, a printed report can be ' `� � provided from the compatible FACP, indicating the �, : status and settings assigned to each individual detector. ;� When Model OP921 moves to Alarm mode, the detector � +� � � will flash red and continue flashing until the system is ,�� ,,�� f::' � reset at the FACP. At that same time, any user-defined, �: � "` system-alarm functions programmed into the system �� "'� are activated. 1. Labyrinth Model OP921 contains a tri-color LED indicator, capable 2. Opticaltransmitter of flashing any one (1) of three (3) distinct colors: 3. opacatreceiver green,yellow,or red. During each flash interval, the microprocessor-based detector monitors the following: SIEMENS Industry, Inc. CerberusT^^ PRO Building Technologies Division