Reid Middleton 7/10/2018 - Laserfiche WebLink

5. Repair the slab and reinforcing damage at the underside of the slab at the roof access gate location. This will involve chipping of unsound materials, cleaning and coating of existing reinforcing, potential addition of supplemental reinforcing, and concrete patching. 6. Fiber wrap at precast beams with shear cracks. This is expected to involve between two and twelve locations. 7. Fiber wrap and epoxy injection at a cracked column location, below the roof, at Grid E/21. 8. Clean and add a protective coating to steel shims at existing beam corbels and patch loose grout. This is expected to include roughly a dozen locations. 9. Add a drain near the central stair at the roof level. This is expected to be tied into the drain line for an adjacent, existing drain. A limited, sloped concrete overlay may be required near the central stair, to encourage drainage away from the stair to the new drain. 10. Replace the existing joint material in the roof-level seismic joint, near the center of the structure. 11. Patch the roof-level membrane. This may involve several dozen locations, and is expected to occur in conjunction with slab patching per Item 3 above. B. SCOPE OF SERVICES 1. Site Review: Reid Middleton will conduct a site walk with the City of Everett and members of the consultant team. The purpose of this walk is to review the issues noted in the letter report and the waterproofing consultant's recommendations, and to verify the intended strategies with the City. This will be part of, or shortly after, a project kick-off meeting. 2. Background Drawing Creation: Reid Middleton will use PDF drawings of the existing facility as a basis for the creation of CAD or Revit drawings. These drawings will form the backgrounds for the creation of a repair drawing set. The level of detail of these drawings will be sufficient for generation of repair drawings only, and is not intended to provide a full record set for the structure. 3. Repair Drawings: Reid Middleton will use the backgrounds noted above to create a repair drawing set suitable for permit submittal. The repair drawings will document intended repair locations and typical repair details. Architectural finish information will be provided by Dykeman Architecture, acting as a subconsultant to Reid Middleton. Specifications for the intended repairs are also anticipated. Specification sections for Division 00 and 01 information will be provided by the City of Everett, and is outside the scope of this proposal. 4. Cost Estimation: Reid Middleton's subconsultant, ProDims, will provide a cost estimation mid-way through the design phase and update the estimate at the permit submittal.