Faber Construction Corporation 1/10/2019

I City of Everett 01 5500 - 6 Evergreen Branch Library Expansion 2017-008 2) Maintain 2 way traffic at all times except on "one-way" Streets. Additional width for facilitating traffic flow may be obtained by requesting on Street parking to be prohibited adjacent to the work area 3) Maintain traffic on a paved surface whenever possible. In the event that a graveled or dirt surface must be used as a detour, maintain a smooth surface and control dust 4) Clean up spillage from trucks on the pedestrian or driving surface adjacent to the work area. 5) Provide safe and protected pedestrian ways. 6) Do not park or place construction Equipment to create an unnecessary sight distance or other safety obstruction to vehicular or pedestrian traffic. 7) Maintain work area traffic control devices in a proper condition on an "around the clock" basis whether or not work is actively being pursued. In addition, the Contractor shall assure that tools and Equipment are properly stored and excavation bridging is secure and adequately covering excavation. d. Erect and maintain all construction signs, warning signs, detour signs, and other traffic control devices necessary to warn and protect the public at all times from injury or damage resulting from the Contractor's operations. e. Be liable for injuries and damages to persons and property suffered by reason of the Contractor's operations or any negligence in connection therewith. f. Construct, maintain in a safe condition, keep open to traffic, and remove when no longer needed detours and temporary approaches that will accommodate traffic diverted from the Roadway, walkway or bridge during construction. On site or off site detours required or necessitated by the Work, including side Street crossings, temporary bridges, utilization of one or more lanes of the construction area for maintenance of through traffic, and related traffic control shall be the responsibility of the Contractor. B. Traffic Control Management 1. General: a. All Projects in Street areas will be inspected with regard to type and placement of pedestrian and vehicular traffic control devices. Traffic control devices not meeting the requirements of the MUTCD Manual shall be considered non standard. Non standard traffic control devices shall not be used unless specifically approved for use, in writing, by the Owner. b. The Contractor shall patrol the traffic control area as often as necessary, but at least daily, and reset all disturbed signs and traffic control devices. Signs and other traffic control devices shall be removed or covered during periods when they are not necessary. c. Before beginning Work, the Contractor shall designate an individual or individuals to perform the duties of Traffic Control Manager (TCM). These individuals shall be in continuous responsible charge of traffic control. A TCM is required on all Projects that require traffic control. 2. Traffic Control Manager (TCM) - The duties of the TCM shall include: a. Discussing proposed traffic control measures and coordinating implementation of the Contractor adopted traffic control plan(s) with the Owner 01 5500 - 6 VEHICULAR ACCESS AND PARKING I