Faber Construction Corporation 1/10/2019

I City of Everett 01 5500 - 11 Evergreen Branch Library Expansion 2017-008 I4) All control signs necessary for nighttime traffic control shall be fully reflectorized. I 5) Existing traffic control and Street name signs that interfere with construction shall be relocated or removed by the Contractor and temporarily stored in a safe place. All "STOP", "YIELD", and "ONE I WAY" signs shall be removed or relocated only upon approval of the Owner. Existing signs shall not be removed until the Contractor has provided temporary measures sufficient to safeguard and direct traffic after the existing signs have been removed. Preservation and I maintenance of traffic control and street name signs shall be the sole responsibility of the Contractor. 6) As Work progresses and as conditions permit, temporarily relocated or I removed traffic and Street name signs shall be reset in their permanent location by the Contractor (see700 series applicable Standard Plans regarding sign and post installation). Signs and other traffic control I devices damaged or lost by the Contractor shall be replaced or repaired by the Contractor at no additional cost to the Owner. The option whether a sign can be repaired or shall be replaced shall be the I Owner's, and such decision shall be final and binding on the Contractor. 7) Traffic control signs, other than parking prohibition signs, which are required to be installed ahead of construction activities, shall be II installed immediately before the construction activity begins. The Contractor may elect, as a matter of convenience in advance of the scheduled construction activity, to install and effectively cover the I signs until the construction activity begins. 8) Construction signs shall be divided into two classes — Class A and Class B. In case of disputes, theOwner will determine if a construction sign is considered as a Class A or B construction sign. 9) When Class A or B construction signs are required, the work to provide these signs shall be: l a) Furnishing, removing, and disposing of the posts or supports for the signs. b) Initial acquisition from the Owner and ultimate return to the Owner of the required Owner furnished signs I c) Initial installation and subsequent removal of both Class A and B construction signs d) All other incidentals necessary for providing Class A or B I construction signs according to the approved traffic control plan(s) b. Class A Signs: I 1) Class A construction signs shall be installed where shown in the Contract. Class A construction signs are those signs that remain in service throughout the construction or during a major phase of the Work. They are mounted on posts, existing fixed Structures, or I substantial supports of a semi permanent nature. Sign and support installation for Class A signs shall be in accordance with the Contract Drawings or the COE Design and Construction Standards Section 700. I c. Class B Signs: 1) Class B construction signs are those signs that are placed and removed daily, or are used for short durations that may extend for one 1 01 5500 - 11 VEHICULAR ACCESS AND PARKING I