2900 GRAND AVE FARMERS MARKET 2020-04-06

• . HJSCAFCa Fasteners (Screws and Welds) Steel Stud Mfg.Co. Screw Table Notes 1. Screw spacing and edge distance shall not be less than 3 x D. (D = Nominal screw diameter) 2. The allowable screw values are based on the steel properties of the members being connected, per AISI section E4. 3. When connecting materials of different metal thicknesses or yield strength, the lowest applicable values should be used. 4. The nominal strength of the screw must be at least 3.75 times the allowable loads. 5. Values include a 3.0 factor of safety. 6. Applied loads may be multiplied by 0.75 for seismic or wind loading, per AISI A 5.1.3. 7. Penetration of screws through joined materials should not be less than 3 exposed threads. Screws should be installed and tightened in accordance with screw manufacturer's recommendations. Allowable Loads For Screw Connections Thickness Steel Properties No.12 No.10 No.8 No.6 Steel Mils Design(in) Dia.=0.216(in) Dia.=0.190(in) Dia.=0.164(in) Dia.=0.138(in) Fy(ksi) Fu(ksi) Shear Pullout Shear Pullout Shear Pullout Shear Pullout 18 0.0188 33 45 66 39 60 33 27 0.0283 33 45 121 59 111 50 30 0.0312 33 45 151 76 141 65 129 55 33 0.0346 33 45 177 84 164 72 151 61 43 0.0451 33 45 280 124 263- - 1-09 244 94 224 79 54 0.0566 33 45 394 156 370 137 344 118 68 0.0713 33 45 557 196 523 173 } Weld Table Notes 1. Weld capacities based on AISI, section E2. 2. When connecting materials of different metal thickness or yield strength (Fu), the lowest applicable values should be used. 3. Values include a 2.5 factor of safety. 4. Based on the minimum allowance load for fillet or flare groove welds, longitudinal or transverse loads. 5. Allowable loads based on E60xx electrodes 6. For material less than or equal to .1242"thick, drawings show nominal weld size. For such material, the effective throat to the weld shall not be less than the thickness of the thinnest connected part. Allowable Loads For Fillet Welds And Flare Groove Welds Design Steel Properties E60XX Elec- Mil Thickness Yield Tensile trodes in. ksi ksi lbs/in 43 0.0451 33 45 609 54 0.0566 33 45 764 68 0.0713 33 45 963 97 0.1017 33 45 1373 118 0.1242 33 45 1677 54 0.0566 50 65 1104 68 0.0713 50 65 1390 97 0.1017 50 65 1983 118 0.1242 50 65 2422 48