Laserfiche WebLink
c-0-A)k-A\ & ..k 0 go <br /> POST-INSTALLED ANCHORS REPORT MAYFS TES ING`ENGINEERS <br /> Report Number: M7181198.0002 <br /> Service Date: 03/30/18 20225 Cedar Valley Rd Ste 110 <br /> Report Date: 04/06/18 Lynnwood, WA 98036-6365 <br /> 425-742-9360 <br /> Client Project <br /> Access Laser Company Access Laser Partitions <br /> Attn: John Buskirk 2211 West Casino Dr. Suite A <br /> 917 134th St SW Everett, WA <br /> Everett, WA 98204 <br /> Project No.: M7181198 <br /> Permit No.: B1710-030 (Building) Weather: Indoors <br /> Samples: N/A <br /> On site to observe the installation of 1"diameter x 18" all-thread rods; (4) rods were installed into each column <br /> base. The holes were inspected for size, depth, spacing and clearance—drilled to a depth of 15" and cleaned <br /> per the epoxy manufacturer's recommendations. The threaded rods were installed using Simpson SET-XP epoxy <br /> (expiration 06/2019). <br /> Pinar Regarding (6) locations, the contractor needs to contact the engineer to discuss locations where <br /> the required embedment could not be achieved per the approved drawings. <br /> PRELIMINARY INSPECTION <br /> Services: Special Inspections/Materials Testing <br /> Mayes/Terracon Rep.: Jacob Keas <br /> Reported to: Western Partitions, Inc. <br /> Contractor: Western Partitions, Inc. <br /> Report Distribution: <br /> (1)Access Laser Company,John (1)Mayes Testing Engineers,Inc, <br /> Buskirk Mike Mattox ® yar <br /> (1)United Partition Systems,Inc., Reviewed By: ' <br /> Jackie Barboza <br /> Robert Gardner <br /> Senior Project Field Manager <br /> The tests were performed in general accordance with applicable ASTM,AASHTO,or DOT test methods. This report is exclusively for the use of the client <br /> indicated above and shall not be reproduced except in full without the written consent of our company. Test results transmitted herein are only applicable to <br /> the actual samples tested at the location(s)referenced and are not necessarily indicative of the properties of other apparently similar or identical materials. <br /> CT0001,10-16-13,Rev.10 Page 1 of 1 <br />