Laserfiche WebLink
. • 2015 Washington State E • Code Compliance Forms for Commercial, R d R3 over 3 stories and all R1 <br /> Design Load Calculation Summary MECH-LOAD-CALC <br /> 2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2&R3 over 3 stories and all RRevised January 2017 <br /> Project Title: Domestic Violenac Service 1110 Rainier Ave,Everett Date 4/2/2019 <br /> For Building Dept. Use <br /> The following information shall be included in the load calculation program summary submitted with <br /> the permit documents. If a load calculation summary is not available, provide the required information <br /> below. <br /> Heating Design Cooling Design <br /> Load in Btu/h(Note Load in Btu/h(Note Calculation Method <br /> Equip. ID Area(s)Served 1) 1) (Note 2) Notes <br /> Units 1-3 Office 36,000 36,000 Existing units old units were adiquit <br /> Unit 4 Office 48,000 48,000 Existing units old units were adiquit <br /> Unit 5 Office 60,000 60,000 Existing units old units were adiquit <br /> Note 1-Design load shall account for the building envelope,lighting, ventilation and occupancy loads of the space(s)served by the <br /> mechanical system.Heating and cooling loads shall be adjusted to account for load reduction achieved by an energy recovery <br /> system,if applicable. <br /> Note 2-Computer load calculation program, worksheet(identify source),or equivalent computation procedure in accordance with ASHRAE <br /> Standard 183. <br />