Laserfiche WebLink
Ms. Melissa Collazo <br /> Nelson Architecture, Inc. <br /> Plan Check Number: B1811-044, First Review <br /> December 24, 2018 <br /> Architectural <br /> 1. Room 106 on Sheet Al-1 shall provide maneuvering clearance for the pull side of the door <br /> per ICC A117.1-09 Section 404.2.3.2. It appears the clearance is intended to satisfy the <br /> requirements shown in Figure 404.2.3.2(f). The minimum clearances shall be specified on <br /> the plans. If Door 106 includes a closer, the clearance perpendicular to the wall shall be <br /> increased to 54 inches. See IBC Section 1101.2. <br /> 2. Door 104 on Plan 1/A1-1 shall provide a minimum latch clearance width of 12 for the pull <br /> side of the door if a closer is provided. See ICC A117.1-09 Section 404.2.3.2 and Figures <br /> 404.2.3.2(b) and 404.2.3.2(e). The minimum clearance shall be specified on the plan. The <br /> adjacent fire extinguisher cabinet (i.e., identified as"FEC"on the plans) shall not protrude <br /> into the clearance space. See IBC Section 1101.2. <br /> 3. Plan 1/A1-1 includes queue line barriers. The queue lines shall be accessible per IBC <br /> Section 1109.12.5. The lines shall comply with ICC A117.1-09 Section 403.5.1 and Figure <br /> 403.5.1. The clear width at the 180-degree turns, including the exit from the queue line to <br /> the teller window aisle, shall be a minimum of 60-inches wide. The turning width may be <br /> reduced to 48 inches where the adjacent widths of the queue lines and aisle are increased <br /> to 42 inches. See IBC Section 1101.2. <br /> This review has been performed for general compliance with the building codes as adopted and <br /> amended by the state of Washington and the city of Everett. Corrections and comments made <br /> during the review process do not relieve the project from compliance with code and permit <br /> requirements. The designers-of-record are responsible for a complete design in accordance <br /> with the laws of the state of Washington. <br /> If you have any questions or require additional clarification, please contact us. <br /> Respectfully, <br /> Drew Martin, P.E., S.E. <br /> Associate Engineer/ Commercial Plans Examiner <br /> (425)257-8813 <br /> dmartin@everettwa.gov <br /> S:\B M a rti n\2018\81811-044_R 1.d ocx <br /> (I) 3200 Cedar Street 0425.257.8800 O everettpw@everettwa.gov <br /> Everett,WA 98201 425.257.8882 fax everettwa.gov <br />