Rodarte Construction Inc Everett Station Parking Expansion

I 1 wet mils to a test deck that is located at 40N latitude or higher with at least 10,000 ADT and I 2 which was applied during the months of September through November. 3 I 4 'Paint is applied to an approximately 4"x12" aluminum panel using a drawdown bar with a 5 50 mil gap. The coated panel is allowed to dry under ambient conditions (50±10% RH and 6 72±5 °F) for 24 hours. Visual evaluation of the dry film shall reveal no cracks. I 7 8 9-34.3 Plastic 9 In the first sentence of the last paragraph, "Federal Standard 595" is revised to read "SAE AMS 10 Standard 595". I 11 12 9-34.3(2) Type B — Pre-Formed Fused Thermoplastic 13 In the last two paragraphs, each reference to "Federal Standard 595" is revised to read "SAE 14 AMS Standard 595". 15 16 9-34.3(4) Type D — Liquid Cold Applied Methyl Methacrylate I 17 The Test Method value for Adhesion to PCC or HMA, psi is revised to read "ASTM D45411". 18 19 9-34.4 Glass Beads for Pavement Marking Materials I 20 In the Test Method column of the table titled Metal Concentration Limits, "EPA 3052 SW-846 21 6010C" is revised to read "EPA 3052 SW-846 6010D". 22 23 9-34.5(1) Temporary Pavement Marking Tape — Short Duration I 24 This section, including title, is revised to read: 25 26 9-34.5(1) Temporary Pavement Marking Tape — Short Duration (Removable) I 27 Temporary pavement marking tape for short duration (usage is for up to two months) shall 28 conform to ASTM D4592 Type I except that black tape, black mask tape and the black 29 portion of the contrast removable tape, shall be non-reflective. 30 31 9-34.5(2) Temporary Pavement Marking Tape — Long Duration 32 This section's title is revised to read: I 33 34 Temporary Pavement Marking Tape — Long Duration (Non-Removable) 35 36 The first sentence is revised to read: I 37 38 Temporary pavement marking tape for long duration (usage is for greater than two months 39 and less than one year) shall conform to ASTM D4592 Type II. I 40 41 ASTM E2176 is deleted from the second sentence. 42 I 43 9-34.7(1) Requirements 44 The first paragraph is revised to read: 45 46 Field performance evaluation is required for low VOC solvent-based paint per Section 9- I 47 34.2(4), Type A — liquid hot applied thermoplastic per Section 9-34.3(1), Type B — 48 preformed fused thermoplastic per Section 9-34.3(2), Type C — cold applied preformed tape 49 per Section 9-34.3(3), and Type D — liquid applied methyl methacrylate per Section 9- ' 50 34.3(4). City of Everett Page AM-144 Amendments I Everett Station 80 Stall Parking Expansion June 2019 I