Laserfiche WebLink
City of Everett <br /> 014500 - 2 <br /> 3600 Smith Street Clean Up <br /> 1.4 SUBMITTALS <br /> A. Qualification Data: For testing agencies specified in "1.05 Quality Assurance" Article to <br /> demonstrate their capabilities and experience. Include proof of qualifications in the form <br /> of a recent report on the inspection of the testing agency by a recognized authority. <br /> B. Delegated-Design Submittal: In addition to Shop Drawings, Product Data, and other ' <br /> required submittals, submit a statement, signed and sealed by the responsible design <br /> professional, for each product and system specifically assigned to Contractor to be <br /> designed or certified by a design professional, indicating that the products and systems <br /> are in compliance with performance and design criteria indicated. Include list of codes, <br /> loads, and other factors used in performing these services. <br /> C. Reports: Prepare and submit certified written reports that include the following: <br /> 1. Date of issue. <br /> 2. Project title and number. <br /> 3. Name, address, and telephone number of testing agency. <br /> 4. Dates and locations of samples and tests or inspections. <br /> 5. Names of individuals making tests and inspections. <br /> 6. Description of the Work and test and inspection method. <br /> 7. Identification of product and Specification Section. <br /> 8. Complete test or inspection data. <br /> 9. Test and inspection results and an interpretation of test results. <br /> 10. Ambient conditions at time of sample taking and testing and inspecting. <br /> 11. Comments or professional opinion on whether tested or inspected Work complies <br /> with the Contract Document requirements. <br /> 12. Name and signature of laboratory inspector. <br /> 13. Recommendations on retesting and reinspecting. <br /> D. Permits, Licenses, and Certificates: For City's records, submit copies of permits, <br /> licenses, certifications, inspection reports, releases, jurisdictional settlements, notices, <br /> receipts for fee payments,judgments, correspondence, records, and similar documents, <br /> established for compliance with standards and regulations bearing on performance of <br /> the Work. <br /> 1.5 QUALITY ASSURANCE <br /> A. Fabricator Qualifications: A firm experienced in producing products similar to those , <br /> indicated for this Project and with a record of successful in-service performance, as well <br /> as sufficient production capacity to produce required units. <br /> B. Factory-Authorized Service Representative Qualifications: An authorized representative <br /> of manufacturer who is trained and approved by manufacturer to inspect installation of <br /> manufacturer's products that are similar in material, design, and extent to those indicated <br /> for this Project. <br /> C. Installer Qualifications: A firm or individual experienced in installing, erecting, or <br /> assembling work similar in material, design, and extent to that indicated for this Project, <br /> whose work has resulted in construction with a record of successful in-service <br /> performance. i <br /> 01 45 00 - 2 QUALITY CONTROL <br /> i <br />