Laserfiche WebLink
4. <br /> 2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 <br /> Design Load Calculation Summary MECH-LOAD-CALC <br /> 2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2&R3 over 3 stories and all R1Revised January 2017 <br /> Project Title: Panda Express Date 3/16/2018 <br /> For Building Dept. Use <br /> The following information shall be included in the load calculation program summary submitted with <br /> the permit documents. If a load calculation summary is not available,provide the required information <br /> below. <br /> Heating Design Cooling Design <br /> Load in Btu/h(Note Load in Btu/h(Note Calculation Method <br /> Equip. ID Area(s)Served 1) 1) (Note 2) Notes <br /> See <br /> Attached <br /> "Building <br /> Energy <br /> Analysis <br /> Report" <br /> Note 1-Design load shall account for the building envelope,lighting, ventilation and occupancy loads of the space(s)served by the <br /> mechanical system.Heating and cooling loads shall be adjusted to account for load reduction achieved by an energy recovery <br /> system,if applicable. <br /> Note 2-Computer load calculation program, worksheet(identify source),or equivalent computation procedure in accordance with ASHRAE <br /> Standard 183. <br />