3623 HOYT AVE 1-3 2020-06-17 - Laserfiche WebLink

Surinder Sidhu May 4, 2017 Element#5—Stabilize Soils Areas that are to remain uncovered for more than 7 days, are to be stabilized with BMPs. Specific BMP's to be implemented include Temporary and Permanent Seeding(BMP C120), Mulching (BMP C121), and Plastic Covering (BMP C123). Element#6—Protect Slopes While slopes on sight are mild, cut and fill slopes shall be protected as necessary through use of Temporary and Permanent Seeding(BMP C120), Mulching (BMP C121), and Plastic Covering (BMP C123). Element#7—Protect Drain Inlets Inlet protection will utilized on catch basins down gradient and in the vicinity of the disturbed areas. • BMP C220: Storm Drain Inlet Protection Element#8—Stabilize Channels and Outlets Due to flat nature of the area of construction it is not anticipated that any flows of significant velocity will leave the site or cause any negative impact to the downstream conveyance system. Element#9—Control Pollutants All pollutants, including waste materials and demolition debris,that occur onsite shall be handled and disposed of in a manner that does not cause contamination of stormwater. Good housekeeping and preventative measures will be taken to ensure that the site will be kept clean, well-organized, and free of debris. • BMP C 153-Material Storage, Delivery, and Containment Element#10—Control Dewatering No de-watering is anticipated for this project. Element#11—Maintain BMPs All temporary and permanent erosion and sediment control BMPs shall be maintained and repaired as needed to assure continued performance of their intended function. Maintenance and repair shall be conducted in accordance with each particular BMP's specifications. Visual monitoring of the BMPs will be conducted at least once every calendar week and within 24 hours,of any rainfall event:that causes a discharge from the site. If the site