Laserfiche WebLink
inches on center at intermediate supports for nonstructural applications. <br /> h. Corrosion-resistant roofing nails with 7/16-inch-diameter head and 11/2-inch length for 1/2-inch <br /> sheathing and 13/4-inch length for 25/32-inch sheathing. <br /> i. Corrosion-resistant staples with nominal 7/16-inch crown or 1-inch crown and 11/4-inch length for <br /> 1/2-inch sheathing and 1-inch length for 25/32-inch sheathing.Panel supports at 16 inches (20 inches if <br /> strength axis in the long direction of the panel,unless otherwise marked). <br /> j. Casing(11/2" x 0.080")or finish(11/2" x 0.072")nails spaced 6 inches on panel edges, 12 inches at <br /> intermediate supports. <br /> k. Panel supports at 24 inches. Casing or finish nails spaced 6 inches on panel edges, 12 inches at <br /> intermediate supports. <br /> 1. For roof sheathing applications,8d nails(21/2" x 0.113")are the minimum required for wood <br /> structural panels. <br /> m. Staples shall have a minimum crown width of 7/16 inch. <br /> n. For roof sheathing applications,fasteners spaced 4 inches on center at edges,8 inches at <br /> intermediate supports. <br /> o. Fasteners spaced 4 inches on center at edges, 8 inches at intermediate supports for subfloor and wall <br /> sheathing and 3 inches on center at edges,6 inches at intermediate supports for roof sheathing. <br /> p. Fasteners spaced 4 inches on center at edges, 8 inches at intermediate supports. <br /> Top Previous Section Next Section To view the next subsection please select the Next Section option. <br /> COPYRIGHT 2007 by INTERNATIONAL CODE COUNCIL,powered by citation <br />