Laserfiche WebLink
or 425-257-8224) with any questions/concerns/specific requirements while preparing plans. <br />19. Provide construction phasing and timeline information in the construction permit submittal. <br />20. Provide evidence that parking will be adequately provided for throughout the project. <br />21. Provide and get approval for traffic control plans prior to any interruptions to the local street <br />network. <br />22. Provide frontage improvements (roadway, pedestrian, bicycle) as needed, along the entire <br />parcel frontage. <br />23. Any broken or damaged sidewalk/ public right-of-way shall be repaired/ replaced in <br />accordance with current City of Everett Standards and per the direction of the City Public <br />Works Inspector. <br />24. All sidewalks along the property (including adjacent to the field) shall comply with current <br />standards at the time of project completion. <br />25. Provide ADA-approved wheel chair ramps at all crosswalks, including their receiving ramps. <br />26. Upgrade all ramps at all intersections and crosswalks, including receiving ramps, to current <br />standards at the time of project completion. <br />27. Access point requires traffic control device (stop sign). <br />28. All roadways and driveways must meet City of Everett Design Standards. <br />29. Access point is a private roadway. Use City of Everett standard driveway plans. <br />30. All traffic control markings and devices on driveways within 50 feet of right-of-way shall be <br />MUTCD compliant. <br />31. Site access as proposed appears acceptable but traffic analysis is required prior to full <br />approval. <br />32. Provide detailed site plan, including circulation and parking details. <br />33. Parking layout must be consistent with City of Everett Standards (#340). <br />34. Bus loading on Rainier Ave and 261h Ave is acceptable per Everett's Traffic Engineering <br />Department. <br />35. DCVA required on premise for irrigation. <br />36. DCDA required for fire service. This device can be located inside the building's riser room if <br />located within 70ft of the connection to the main. Otherwise, it shall be placed outside of the <br />building in an underground vault. <br />SPU17-008 <br />Page 10 of 10 <br />