Thomco Construction Inc. 6/14/2021

I CITY OF EVERETT SPECIAL PROVISIONS minimumor time required I plane as appropriate.toplace and Forcompact paving, scheduletheHMA mixture such closure to individual lanes or portions thereof that accommodates the required the traffic volumes and schedule of traffic volumes noted in the approved traffic control plan. Schedule work so that adjacent intersections are not impacted at the same time and comply with the Traffic Engineer's traffic control restrictions. Address each individual intersection closure or partial closure in the traffic control plan that was submitted to and accepted by the Engineer in accordance with Section 1-10.2(2). b. When planing or paving and related construction must occur in an intersection, consider scheduling and sequencing such work into quarters of the intersection, or half or more of an intersection with side street detours. Be prepared to sequence the work to individual lanes or portions thereof. c. Should closure of the intersection in its entirety be necessary keep such closure to the minimum time required to place and compact the HMA mixture, plane, remove asphalt, tack coat, and as needed. d. Any work in an intersection requires advance warning in both signage and a number of Working Days advance notice as determined by the Engineer, to alert traffic and emergency services of the intersection closure or partial closure. e. Allow new compacted HMA asphalt to cool to ambient temperature before allowing any traffic on it. Traffic is not allowed on newly placed asphalt until obtaining Engineer approval. 2. Comply with Section 8-23 for temporary centerline marking, post-paving temporary marking, temporary stop bars, and maintaining temporary pavement marking. 3. Comply with Section 8-22 for permanent pavement marking. 5-04.3(14)B2 Submittals - Planing Plan and HMA Paving Plan Submit a separate planing plan and a separate paving plan to the Engineer at least five Working Days in advance of each operation's activity start date. These plans must show the coordination of moving operation and traffic control as they will be discussed at the pre-planing briefing and pre-paving briefing. When requested by the Engineer, provide each operation's traffic control plan on 24 x 36 inch or larger size Drawings at a scale of 1 inch equals 20 feet showing both the area of operation and sufficient detail of traffic beyond the area of operation that may require detouring traffic. The scale on the Shop Drawings may be changed if the Engineer agrees sufficient detail is shown. The planing operation and the paving operation include, but are not limited to, metal detection, removal of asphalt and temporary asphalt of any kind, tack coat and drying, staging of supply trucks, paving trains, rolling, scheduling, and as may be discussed at the briefing. Water Main Replacement"V" Division 5-SURFACE TREATMENTS April,2021 WO No.-UP3730 AND PAVEMENTS SP-163