Ordinance 3560 - Laserfiche WebLink

1 the above fees for house piping will be collected. SECTION 15 - PLANS REQUIRED The Administrative Authority may require the submission of plans, specifications, drawings and such other information as h- may deem necessary, prior to the commencement of, and at any time during the progress of any work regulated by this ordinance or amendments thereto. Jobs requiring more than sixty (60) feet of pipe shall be accompanied by a sketch or plan showing the location and size of each section, and the location, size and purpose of each outlet. SECTION 16 - GAS METER A meter location shall be provided by the consumer for th- building or premise to be served. All gas meter locations shall be approved by the Gas Company. All such locations shall conform to State and local fire prevention regulations. Where more than one meter is set on a particular premise, they shall be set at one location, except where this is impractical . In multiple meter installations each separate gas piping system shall be identified in a manner satisfactory to the Gas Company serving the gas. All gas meters shall be so placed as to be at all times readily accessible for inspection, reading, testing and shutting off the gas supply. All service piping or main supply shutoff valves must be outside of the building and readily accessible. Gas meters shall not be located under show windows or under interior stairways, or in engine, boiler, heater, or electri meter rooms. Where not prohibited by other regulations, gas meter. may be located in the open under exterior stairways. Every basement, cellar or .imeter room containing two or mo e gas meters shall be provided with permanent ventilation through an opening, metal duct or vent having a cross-sectional area of at least 144 square inches leading to the outside air; provided, however, -12-