Brink Electrical Inc. 7/19/2022 - Laserfiche WebLink

I City of Everett 01 25 00 - 2 Inductive Charging Infrastructure for Everett Transit 1. LABELS: Locate required product labels and stamps on a concealed surface or, where required for observation after installation, on an accessible surface that is not conspicuous. I 1.4 SUBMITTALS A. PRODUCT LISTING SUBMITTAL: Submit three (3) copies of the product-listing schedule within thirty (30) days after the date of commencement of the work. Provide a written explanation for omissions of data, and for known variations from contract requirements. At Contractor's option, initial submittal of the product-listing schedule may be limited to product selections and product designations that must be established early in the contract time. Submit completed product-listing schedule within sixty (60) days after commencement of the work. 1.5 PRODUCT DELIVERY, STORAGE, AND HANDLING I A. Deliver, store, and handle products in accordance with the manufacturer's recommendations, using means and method that will prevent damage, deterioration and loss, including theft. B. Schedule delivery to minimize long-term storage at the site and to prevent overcrowding of construction spaces. C. Coordinate delivery with installation time to ensure minimum holding time for items that are flammable, hazardous, easily damaged, or sensitive to deterioration, theft and other losses. D. Deliver products to the site in the manufacturer's original sealed container or other I packaging system, complete with labels and instruction for handling, storing, unpacking, protecting and installing. E. Inspect products upon delivery to ensure compliance with the contract documents, and 1 to ensure that products are undamaged and properly protected. F. Store products at the site in a manner that will facilitate inspection and measurement of quantity or counting of units. G. Store heavy materials away from the project structure in a manner that will not endanger , the supporting construction. H. Store products subject to damage by the elements above ground, under cover in a weather-tight enclosure, with ventilation adequate to prevent condensation. Maintain temperature and humidity within range required by manufacturer's instructions. I. OFF-SITE STORAGE: If requested by the Contractor and approved in writing by the 1 Owner, the Owner may make payment to the Contractor for products stored off-site. J. OWNER-FURNISHED MATERIALS: When materials or equipment furnished by the ' Owner for installation by the Contractor are to be delivered and stored prior to installation, 01 25 00 - 2 SUBSTITUTION PROCEDURES '