Valdez Construction 6/12/2023 - Laserfiche WebLink

City of Everett 01 30 00 - 10 Inductive Charging Infrastructure for Everett Transit samples required by individual Specification Sections and notations of coordination requirements with other work. C. Submittal of the Working drawings shall include verification of and provide special notation of dimensions established by field measurements. D. Working Drawings and associated calculations, if required, shall be prepared, stamped and signed by an Engineer of the involved discipline, currently registered as a Professional Engineer in the State of Washington. Identify calculations by reference to the working drawing to which the calculations pertain. E. The Contractor shall not begin work for which working drawings and associated calculations are required until the drawings and calculations have been reviewed by the Construction Manager; and the Construction Manager's exceptions, if any, have been addressed; and, submittals have been returned to the Contractor with the required approval stamps and signatures. 3.7 SAMPLES A. Provide office samples of sizes and quantities to clearly illustrate full range of manufacturers' standard colors, textures, patterns, functional and aesthetic characteristics of products and materials, including integral parts and attachment devices. B. Erect field samples and mock-ups at the work site as specified in the individual Specification sections and as may be necessitated by the Contractor submitting value engineering proposals, and at locations acceptable to the Construction Manager. C. Sample submittals shall include identification on each sample, with full Project information as required herein and in the individual Specification sections. D. Furnish required samples at no additional cost to the Owner. 3.8 OVERSTOCK ITEMS The Contractor shall coordinate with the Construction Manager to develop the list of overstock items. END OF SECTION 01 30 00 01 30 00 - 10 SUBMITTALS