Laserfiche WebLink
Model: FSH-2, FSH-2A-99 Installation <br /> 2.03.3 Mood ► i Connection <br /> Safety interlocks will disable power supplied to the appliance under the hood if any of the following conditions <br /> occur: <br /> • Filter becomes excessively dirty or air flow through hood is obstructed. <br /> • Filter is missing or not installed correctly. <br /> • The fire extinguishing system has been activated, or is not armed. <br /> • Filter access cover is removed or not installed correctly (hood blower will also shutdown). <br /> Model FSH-2: <br /> 1. The Model FSH-2 Hood requires a separate, field installed, interlocking circuit with an appropriately sized <br /> contactor, connected as shown by this diagram. Customer supplied. <br /> 2. Remove Cover from Interlock Tie- <br /> In Box and run appropriately sized <br /> CONTROL POWER <br /> conduit and wire to a hood & <br /> appliance connection box _ ___ _ <br /> r CONTROL POWER <br /> (supplied by customer). Allow <br /> enough conduit and wire so the —i <br /> HOOD SUPPLY POWER <br /> hood can be accessed for cleaning <br /> (SUPPLIED BY CUSTOMER) <br /> and servicing. <br /> 3. Make appropriate connections. L_ q J <br /> See diagram. I INTERLOCK RELAY IN HOOD <br /> 4. Reinstall Interlock Tie-In Box <br /> L ___J 1 <br /> Cover. M r--y--1 F—+--1 <br /> --- ---*—Hip—rt---- ------�� L, <br /> +_SIF_--___ ______---1 i L-+L2 <br /> M�__F__k-___ ____ _-- �-4L3 <br /> L_ __J L___J <br /> CONTACTOR LOAD CENTER CIRCUIT BREAKER <br /> (SUPPLIED BY CUSTOMER) (SUPPLIED BY CUSTOMER) <br /> APPLIANCE HOOD AND APPLIANCE CONNECTION APPLIANCE SUPPLY POWER <br /> (SUPPLIED BY CUSTOMER) (SUPPLIED BY CUSTOMER) (SUPPLIED BY CUSTOMER) <br /> Model FSH-2A-99: <br /> 1. The appliance interlock contactor feature is built-in on this model Hood. Refer to Figure 2.03.1 (B) and the <br /> wiring diagram supplied with the unit for field wiring information. <br /> 10 <br />