Laserfiche WebLink
Model: FSH-2, FSH-2A-99 Operation <br /> ► I ► E.A.C. ► Filter Removal <br /> 2 <br /> 1 <br /> 1Q Unlatch Access Cover and lift off. <br /> 0 Grasp E.A.C. CollectorCell/HEPA Filter and pull straight out, at a slightly upward angle. <br /> E.A.C.4.02.5 i ' ► Filter Installation <br /> Pin must align &fit <br /> thru hole in rear of Q Ensure the airflow indicator <br /> cell. arrow points [UP] &the <br /> 2 cell's Contact Pad faces to <br /> the right side. <br /> Q2 Align cell (or filter) in guides <br /> and slide into hood. If <br /> installed properly, cell is <br /> flush with hood front. If <br /> not, cell is not installed <br /> Airflow incorrectly. <br /> arrow on .� (I3 Replace Access Cover and latch. <br /> cell must <br /> point up <br /> NOTE: HEPA Filter models ONLY-charcoal filter is located prior to the HEPA,such that air passes through it first before the <br /> HEPA filter. When installed, the filter must properly engage a proofing switch located on the back wall. <br /> 30 <br />