709 N BROADWAY 2023-10-19 - Laserfiche WebLink

System LEDs Panel Operation Options Led Description Language English or French Fire Alarm Red LED. Flashes when there is an active alarm Marketplace U.S.or Canada event on any loop. On steady once acknowledged. AC fail delay Off:Off-premise notification of an AC power failure Trouble Yellow LED. Flashes when there's a fault with a is immediate. monitored circuit or system component or when a 1 to 15 hours:Delays the off-premise notification of circuit is disabled. On steady once acknowledged. an AC power failure by the time period selected. Sup Yellow LED. Flashes when there is an active super- Zone resound On:NACs resound each time a device in the zone visory event on any loop.On steady once acknowl- goes into alarm even if they were silenced edged. Off: Inhibits the NACs from turning on again(after they were silenced)when a second device in the Ac Power Green LED. On when the panel has AC power. zone goes into alarm. Disable Yellow LED. Double-flashes when there is a dis- Reset inhibit after Off:Panel reset is operational immediately. abled circuit,alarm relay,or remote annunciator. NACs turn on 1 minute:Panel reset is inhibited for one minute. Ground Yellow LED. On steady during an active ground Auto signal Off:Allows immediate silencing of signals from an Fault fault. silence off-normal condition using the Signal Silence button Test Yellow LED. Flashes when performing an audible 5 to 30 minutes:Delays the silencing of signals walk test. Steady indicates a silent test. from an off-normal condition by disabling the Signal Monitor Yellow LED. Flashes when there is an active monitor Silence button for the time period selected. event on any loop. On steady once acknowledged. Day start Start time for daytime sensitivity Service Yellow LED. Indicates that detector needs servicing. Night start Start time for nighttime sensitivity Detector Date U.S.:MM/DD/YYYY,Canada:DD/MM/YYYY Signal Yellow LED. On steady indicates that NAC circuits Sounder Base Six configuration settings Silence are turned off but the panel is still in alarm. Mapping Disabled:Device mapping is not available Remote Yellow LED. On steady indicates that the dialer is Enabled:Device mapping is available Discon- disabled or that the alarm relay is enabled or dis- LCD banner Banner text for line one and line two.Each line is nect abled when the dialer is set to modem only, capable of up to 20 characters. Drill Yellow LED. Indicates that the panel is in drill. Event notification Zone:When a device is a member of a zone,only Reset Yellow LED. Indicates that the panel is resetting. the zone information is sent to the LCD display, LEDs,printer,and dialer. Panel Yellow LED. Indicates that the panel has been zone/device:Zone information is sent to the LCD Silence silenced during an active trouble, supervisory, or display and LEDs.Device information is sent to the alarm event and indicates that new event activa- printer and dialer. tions have been acknowledged. Device:Only device information is reported. User Keys Yellow LED.Indicates the programmed key function is active. Dimensions Programming Surface mounting holes iO-Series life safety systems are simple to set up,yet also offer ad- �-D2♦I D3-- vanced programming features that put these small building panels into a class of their own.The auto programming feature quickly 011 100 C ° C gets the panel operational using factory default settings. Basic I zone and point settings can be programmed easily through the ➢ C U) front panel interface, so the system is up and running in no time. 0 For more advanced system configuration and correlation groups ➢ ➢ :� programming, iO-Series systems interface to a PC running com- p — patible iO-CU software.This option offers full system configuration in the familiar Windows®operating environment. Connection is D1 D4 E typically made to a laptop through the panel's optional RS-232 ➢ C r- communications port,which can also be used to connect a sys- tem printer. Q) Among the many advanced features of iO-Series control panels c U) is the optional network card.This module provides a standard Surface mounting holes 10/100 Base T Ethernet®network connection that permits access to the control panel from any remote location with the correct communications protocols.The connection can be used to D6 download to the panel from the iO-CU, or upload and view system D5 reports using the iO-CU. Available system reports include: Panel dimensions,in(cm) • Correlation groups • Device details Model D1* D2 D3 D4 D5* D6 • Device maintenance • History i064 21.50 3.85 7.5 15.5 14.25 10.25 • Internal status • System configuration (54.6) (9.8) (19.0) (39.4) (36.2) (26.0) • System status • Walk test Add 1-1/2 in. (3.81 cm)to D1 and D5 dimensions for trim kit. • Dialer Page 3 of 8 DATA S H E L . 85005-0131 Not to be used for installation purposes. Issue 4