2319 GALE PL 2023-10-31 - Laserfiche WebLink

■ ■ ; Nor- SUN BLUE RAVEN 19 SOLAR ME ■ FRAME me----- ---S-FM -MICRORAILTM INSTALLATION GUIDE ; PAGE ____________________________________________________________ _ ___________ 91 E W BONDING PATH: E-W module to module bonding is accomplished with 2 pre-installed bonding pins which engage on the secure side of the MicrorailTM and splice. I I Star Washer is WEEBLUG Single Use Only Single Use OnlyI—::p Alternate method N-S BONDING PATH: TERNINALTORQUIE N-S module to module bonding is Install Conductor and accomplished with bonding clamp with 2 integral torque to the following: TERMNALTORQUE, TERMNALTORQUE bonding pins. (refer also to alternate method) 4-6 AWG 35in-lbs Install Conductor and Install Conductor and 8 AWG 25 in-lbs torque to the following: torque to the following: 10-14 AWG 20 in-lbs 4-14 AWG 35in-lbs 6-14 AWG 7ft-lbs LUG DETAIL& TORQUE INFO LUG DETAIL& TORQUE INFO LUG DETAIL& TORQUE INFO Ilsco Lay-In Lug (GBLr4DBT) Ilsco Flange Lug (SGB-4) Wiley WEEBLug (6.7) • 10-32 mounting hardware 1/4" mounting hardware 1/4" mounting hardware • Torque = 5 ft-lb 0 Torque = 75 in-lb 0 Torque = 10 ft-lb Alternate method • AWG 4-14-Solid or Stranded 0 AWG 4-14-Solid or Stranded 9 AWG 6-14-Solid or Stranded TRIMRAIL BONDING PATH: NOTE: ISOLATE COPPER FROM ALUNUNLA4CONTACTTOPREVENT CORROSION Trimrail to module bonding is accomplished with System bonding is accomplished through modules. System grounding accomplished by attaching bonding clamp with integral bonding pin and a ground lug to any module at a location on the module specified by the module manufacturer. bonding T-bolt. (refer also to alternate method) nrUNVINGNUMBEIt SS